參數資料
型號： M30100M3-XXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
封裝： 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件頁數： 86/166頁
文件大?。?/td> 2060K
代理商： M30100M3-XXXFP
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
23
Symbol
Address
When reset
CPSRF
008F16
0XXXXXXX2
Clock prescaler reset flag
Bit name
Function
Bit symbol
b7
b6
b5
b4
b3
b2
b1
b0
Clock prescaler reset flag
0 : No effect
1 : Prescaler is reset
(When read, the value is “0”)
CPSR
W
R
Nothing is assigned.
In an attempt to write to these bits, write “0”. The value, if read, turns out to be
indeterminate.
Clock Generating Circuit
b7
b6
b5
b4
b3
b2
b1
b0
RW
CM20
CM21
CM22
CM23
0
00
0
Oscillation stop detection register (Note 5)
Symbol
Address
When reset
CM2
000C16
0416
Bit name
Function
Bit symbol
Main clock switch bit
Oscillation stop detection
interrupt enable bit
0: The function is invalid.
1: The function is valid.
0: Select XIN clock.
1: Select ring oscillator.
0: Disabled
1: Enabled
0: XIN oscillating normally
1: XIN stopping abnormally
Oscillation stop
detection bit
Clock monitor bit
Reserved bit
Always set to "0"
Note 1: Set to “0” before stopping the oscillation of the main clock (XIN-XOUT).
(stop mode, low power dissipation mode, ring oscillation mode)
An oscillation stop is detected if the oscillation of the main clock (XIN-XOUT) is
stopped when the following two conditions are satisfied: (1) the oscillation stop
detection function is valid and (2) CM21=1.
Note 2: Valid when CM20=1.
Note 3: CM22 bit switches to “1“ automatically if an oscillation stop is detected when
both CM20 bit and CM 21 bit are “1”. CM22 bit cannot be cleared when CM23=1.
Note 4: This bit is valid when CM20 bit is “1”. Use this bit for the purpose of confirming
XIN operation for oscillation stop detection interrupt execution.
Note 5: In case of writing to this register, set bit 0 of the protect register(000A16) to "1".
(Note 3)
(Note 2)
(Note 1)
(Note 4)
Figure 1.8.5. Oscillation stop detection register and clock prescaler reset flag
1/32
fC32
XCIN
Clock prescaler reset flag (bit 7
at address 008F16) set to “1”
Reset
Clock prescaler
Figure 1.8.6. fc32 block diagram
相關PDF資料
PDF描述
M30100M3T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
M301N2M8T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M301N2M4T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M30201F2T-FP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP56
M30201M2-XXXFP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP56
相關代理商/技術參數
參數描述
M30100T3-RPD-E 制造商:Renesas Electronics Corporation 功能描述:DEV EMULATOR POD M16C/10 SERIES - Bulk
M30100T-PTC 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Converter for Connecting 32-pin 0.8mm-pitch QFP for M30100T-PRB (for M16C/10 Group M30100)
M30-1010046 功能描述:集管和線殼 1.25MM FEMALE CRIMP TIN PK OF 105 RoHS:否 產品種類:1.0MM Rectangular Connectors 產品類型:Headers - Pin Strip 系列:DF50 觸點類型:Pin (Male) 節距:1 mm 位置/觸點數量:16 排數:1 安裝風格:SMD/SMT 安裝角:Right 端接類型:Solder 外殼材料:Liquid Crystal Polymer (LCP) 觸點材料:Brass 觸點電鍍:Gold 制造商:Hirose Connector
M3010102636207.32LLZZ 制造商:3M Electronic Products Division 功能描述:QUOTE # V05-0068
M30102 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*