參數資料
型號： M30100M2T-XXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
封裝： PLASTIC, LQFP-32
文件頁數： 90/163頁
文件大?。?/td> 2767K
代理商： M30100M2T-XXXFP
Oscillation Stop Detection
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
32
Oscillation stop detection bit (CM20)
You can start the oscillation stop detection by setting this bit to "1" and CM21=1 (oscillation stop detection
interrupt enabled). The detection is not executed when this bit is set to "0" or in reset status. Be sure to set
this bit to "0" before setting for the stop-mode. Set this bit again to "1" after release from stop-mode. Set
this bit to "0" also before setting the main clock stop bit (bit 5 at 000616) to "1".
Do not set this bit to "1" if the frequency of XIN is lower than 2 MHz.
An oscillation stop is detected if CM02=“1” (peripheral function clock has been set for stop in wait mode)
and the mode is shifted to wait.
Oscillation stop detection interrupt enable bit (CM21)
When CM20=1 and CM21=1, an oscillation stop detection interrupt is generated if an abnormal stop of
XIN is detected. The ring oscillator starts operation instead of the XIN clock which stopped abnormally.
The operation goes further with the main clock supplied from the ring oscillator. For the oscillation stop
detection interrupt, judgment on the interrupt condition is necessary, because this interrupt shares the
vector table with watchdog timer interrupt. Figure 1.10.3 shows flow of the judgment with oscillation stop
detection interrupt processing program.
Main clock switch bit (CM22)
When setting this bit to "1", the ring oscillator is selected as main clock. At this time, the ring oscillator
starts simultaneously if it has been stopped (CM14=1). This bit is cleared only when CM23 is "0" (when
XIN is oscillating).
If an oscillation stop is detected while both CM20 and CM21 are “1”, this bit automatically switches to “1”.
When this bit is set to “1”, the ring oscillation stop bit (bit 4 of address 000716) is automatically set to “0”.
Clock monitor bit (CM23)
You can see the operation status of the XIN clock. When this bit is "0", XIN is operating correctly. You can
check the oscillation status of XIN when an oscillation stop detection interrupt is generated or after reset.
When oscillation stop detection is invalid (CM20=“0”), the clock monitor bit is “0”.
相關PDF資料
PDF描述
M30102M6T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M30102M3-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M30100M2T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
M30102M3T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M30100M2-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
相關代理商/技術參數
參數描述
M30100T3-RPD-E 制造商:Renesas Electronics Corporation 功能描述:DEV EMULATOR POD M16C/10 SERIES - Bulk
M30100T-PTC 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Converter for Connecting 32-pin 0.8mm-pitch QFP for M30100T-PRB (for M16C/10 Group M30100)
M30-1010046 功能描述:集管和線殼 1.25MM FEMALE CRIMP TIN PK OF 105 RoHS:否 產品種類:1.0MM Rectangular Connectors 產品類型:Headers - Pin Strip 系列:DF50 觸點類型:Pin (Male) 節距:1 mm 位置/觸點數量:16 排數:1 安裝風格:SMD/SMT 安裝角:Right 端接類型:Solder 外殼材料:Liquid Crystal Polymer (LCP) 觸點材料:Brass 觸點電鍍:Gold 制造商:Hirose Connector
M3010102636207.32LLZZ 制造商:3M Electronic Products Division 功能描述:QUOTE # V05-0068
M30102 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*