LV3329PE
No.A1856-2/30
Continued from preceding page.
Bass control:
The bass control gain can be maximum boost +15dB position and maximum cut -15dB position
(0dB/±1.25dB/±2.75dB/±4.75dB/±7dB/±9.5dB/±12.25dB/±15dB) SCF.
The bass control center frequency 60Hz/80Hz/100Hz/200Hz can be selected.
The bass control quality factor 1.0/1.25/1.5/2.0 can be selected.
Middle control:
The middle control gain can be maximum boost +12.25dB position and maximum cut -12.25dB position.
(0dB/±1.25dB/±2.75dB/±4.75dB/±7dB/±9.5dB/±12.25dB) SCF.
The middle control center frequency 600Hz/800Hz/1kHz/2kHz can be selected.
The middle control quality factor 1.0/1.25/1.5/2.0 can be selected.
Treble control:
The treble control gain can be maximum boost +12.25dB position and maximum cut -12.25dB position.
(0dB/±1.25dB/±2.75dB/±4.75dB/±7dB/±9.5dB/±12.25dB) SCF.
The treble control center frequency 8kHz/10kHz/12.5kHz/15kHz can be selected.
The treble control quality factor 1.0/1.25/1.5/2.0 can be selected.
Fader control: 0dB to -79dB/-∞ (1dB steps)
Independent control each four channels output
Mute
FIXED EQ SCF
LOW CUT
fo : 40Hz/50Hz
LOW
G :
±12dB (2dB steps)
fo : 60Hz/80Hz/125Hz/160Hz/250Hz
Q : 0.5/1.0/2.0/4.0
MID
G :
±12dB (2dB steps)
fo : 500Hz/800Hz/1kHz/2kHz/4kHz
Q : 0.5/1.0/2.0/4.0
HIGH
G :
±12dB (2dB steps)
fo : 5kHz/6.3kHz/8kHz/10kHz/16kHz
Q : 0.5/1.0/2.0/4.0
HIGH CUT
fo : 20kHz
Note: High cut is used to eliminate SCF clock, so SCF cannot be used.
Specifications
Absolute Maximum Ratings at Ta = 25
°C, VSS = 0V
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
VDD max
VDD
9.5
V
Maximum input voltage
VIN max
All input pins
VSS-0.3 to VDD
V
Allowable power dissipation
Pd max
Ta
≤ 85°C, when mounted on a printed circuit
board *
600
mW
Operating temperature
Topr
-40 to +85
°C
Storage temperature
Tstg
-50 to +125
°C
* Specified circuit board : 114.3
× 76.1 × 1.6mm3 : glass epoxy board
Allowable Operating Ratings at Ta = 25
°C, VSS = 0V
Ratings
Parameter
Symbol
Conditions
min
typ
max
Unit
Supply voltage
VDD
7.0
8.0
9.0
V
High-level input voltage
VIH
CL, DI, CE
4.5
5.5
V
Low-level input voltage
VIL
CL, DI, CE
VSS
1.0
V
Input voltage amplitude
VIN
VSS
VDD
Vp-p
Input pulse width
T
φW
CL
1
μsec
Setup time
Tsetup
CL, DI, CE
1
μsec
Hold time
Thold
CL, DI, CE
1
μsec
Operating frequency
fopg
CL
500
kHz