- 您現在的位置：買賣IC網 > PDF目錄11772 > LTC1755EGN#TRPBF (Linear Technology)IC SMART CARD INTERFACE 24SSOP PDF資料下載
參數資料
| 型號： | LTC1755EGN#TRPBF |
| 廠商： | Linear Technology |
| 文件頁數： | 6/16頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC SMART CARD INTERFACE 24SSOP |
| 標準包裝： | 2,500 |
| 應用： | 智能卡 |
| 電源電壓： | 2.7 V ~ 6 V |
| 封裝/外殼： | 24-SSOP（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 24-SSOP |
| 包裝： | 管件 |
| 安裝類型： | 表面貼裝 |
14
LTC1755/LTC1756
APPLICATIO S I FOR ATIO
WU
UU
Figure 7. Deactivation Sequence
VCC
1755 F07
RST
CLK
I/O
AUX2
AUX1
RST = RIN
DEACTIVATION DIRECTIVE
CLK = CIN
I/O = DATA
GND
VIN
VCC
17556 F08
Figure 8. Optimum Bypass Capacitor Placement
Overtemperature Fault Protection
An overtemperature circuit disables the chip and activates
the ALARM pin if the IC’s junction temperature exceeds
150
°C.
Self-Start Mode
By connecting the CARD pin to the PWR pin, the LTC1755/
LTC1756 can be made to start up automatically when a
Smart Card is detected (Figure 6). In this mode, the READY
pin becomes an interrupt signal indicating to the micro-
controller that a Smart Card is present and that VCC, the
charge pump voltage, is at its final value. The Smart Card
remains powered as long as it is detected by the PRES pin.
When the Smart Card is removed the LTC1755/LTC1756
will automatically be deactivated by the fault detection
circuitry.
Deactivation Sequence
For maximum flexibility the Smart Card can be deactivated
either manually or automatically. In manual mode the de-
activation is controlled by explicitly manipulating the
LTC1755/LTC1756 input and control pins (DATA, AUX1IN,
AUX2IN, RIN and CIN followed by PWR and CS). In auto-
matic mode the PWR pin is used to perform the built-in
Figure 6. Self-Start Mode
CARD
TO
MICROCONTROLLER
PWR
READY
1755 F06
deactivation sequence. Once PWR is brought high the built-
in deactivation sequence occurs as shown in Figure 7.
In the event of a fault, the LTC1755/LTC1756 automatically
implement the built-in deactivation sequence.
PC Board Layout
For best performance, the VIN and VCC capacitors should
be placed as close to the LTC1755/LTC1756 as possible.
This will help reduce ringing due to inductance on the VIN
and VCC pins that could cause problems with the LTC1755/
LTC1756 control circuitry or Smart Card. Figure 8 illus-
trates a possible layout technique using only a single layer
of the PC board.
State Definitions
IDLE/DEACTIVATION
VCC, RST, CLK, I/O AUX2, AUX1 = L
READY, ALARM, DATA, AUX2IN, AUX1IN = Z
CARD = PRES
⊕ NC/NO
Once the LTC1755/LTC1756 enter the Idle/Deactivation
state the deactivation sequence begins. The deactivation
sequence will continue until VCC is discharged to approxi-
mately 1V. An activation command (PWR = 0V) will only be
acknowledged once this occurs.
ALARM/DEACTIVATION
Same as Idle/Deactivation except:
ALARM = L
相關PDF資料 |
PDF描述 |
|---|---|
| MS27467E17B55PA | CONN PLUG 55POS STRAIGHT W/PINS |
| LTC1755EGN | IC SMART CARD INTERFACE 24SSOP |
| AD8170ARZ-RL | IC MUX SWITCHING W/AMP 2:1 8SOIC |
| PIC16LF722A-I/SP | MCU PIC 3.5K FLASH XLP 28-SPDIP |
| D38999/20FD5SB | CONN RCPT 5POS WALL MNT W/SCKT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1755ENG#PBF | 制造商:LT 功能描述: |
| LTC1756EGN | 功能描述:IC SMART CARD 16-SSOP RoHS:否 類別:集成電路 (IC) >> 接口 - 專用 系列:- 特色產品:NXP - I2C Interface 標準包裝:1 系列:- 應用:2 通道 I²C 多路復用器 接口:I²C，SM 總線 電源電壓:2.3 V ~ 5.5 V 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:剪切帶 (CT) 安裝類型:表面貼裝 產品目錄頁面:825 (CN2011-ZH PDF) 其它名稱:568-1854-1 |
| LTC1756EGN#PBF | 功能描述:IC SMART CARD INTERFACE 16SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 特色產品:NXP - I2C Interface 標準包裝:1 系列:- 應用:2 通道 I²C 多路復用器 接口:I²C，SM 總線 電源電壓:2.3 V ~ 5.5 V 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:剪切帶 (CT) 安裝類型:表面貼裝 產品目錄頁面:825 (CN2011-ZH PDF) 其它名稱:568-1854-1 |
| LTC1756EGN#TR | 功能描述:IC SMART CARD INTERFACE 16SSOP RoHS:否 類別:集成電路 (IC) >> 接口 - 專用 系列:- 特色產品:NXP - I2C Interface 標準包裝:1 系列:- 應用:2 通道 I²C 多路復用器 接口:I²C，SM 總線 電源電壓:2.3 V ~ 5.5 V 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:剪切帶 (CT) 安裝類型:表面貼裝 產品目錄頁面:825 (CN2011-ZH PDF) 其它名稱:568-1854-1 |
| LTC1756EGN#TRPBF | 功能描述:IC SMART CARD INTERFACE 16SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 專用 系列:- 特色產品:NXP - I2C Interface 標準包裝:1 系列:- 應用:2 通道 I²C 多路復用器 接口:I²C，SM 總線 電源電壓:2.3 V ~ 5.5 V 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:剪切帶 (CT) 安裝類型:表面貼裝 產品目錄頁面:825 (CN2011-ZH PDF) 其它名稱:568-1854-1 |
發布緊急采購，3分鐘左右您將得到回復。