- 您現在的位置：買賣IC網 > PDF目錄10240 > LTC1743CFW#TRPBF (Linear Technology)IC ADC 12BIT 50MSPS SMPL 48TSSOP PDF資料下載
參數資料
| 型號： | LTC1743CFW#TRPBF |
| 廠商： | Linear Technology |
| 文件頁數： | 8/24頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC ADC 12BIT 50MSPS SMPL 48TSSOP |
| 標準包裝： | 1,800 |
| 位數： | 12 |
| 采樣率（每秒）： | 50M |
| 數據接口： | 并聯 |
| 轉換器數目： | 1 |
| 功率耗散（最大）： | 1.2W |
| 電壓電源： | 單電源 |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 48-TFSOP（0.240"，6.10mm 寬） |
| 供應商設備封裝： | 48-TSSOP |
| 包裝： | 帶卷 (TR) |
| 輸入數目和類型： | 2 個單端，雙極；1 個差分，雙極 |
16
LTC1743
1743f
APPLICATIO S I FOR ATIO
WU
U
An external bypass capacitor of 4.7
F or larger is required
for the 2.5V reference output, VCM. This provides a high
frequency low impedance path to ground for internal and
external circuitry. This is also the compensation capacitor
for the reference. It will not be stable without this capaci-
tor.
The difference amplifier generates the high and low refer-
ence for the ADC. High speed switching circuits are
connected to these outputs and they must be externally
bypassed. Each output has two pins: REFHA and REFHB
for the high reference and REFLA and REFLB for the low
reference. The doubled output pins are needed to reduce
package inductance. Bypass capacitors must be con-
nected as shown in Figure 5.
Other voltage ranges in between the pin selectable ranges
can be programmed with two external resistors as shown
in Figure 6a. An external reference can be used by applying
its output directly or through a resistor divider to SENSE.
It is not recommended to drive the SENSE pin with a logic
device since the logic threshold is close to ground and
VDD. The SENSE pin should be tied high or low as close to
the converter as possible. If the SENSE pin is driven
externally, it should be bypassed to ground as close to the
device as possible with a 1
F ceramic capacitor.
Input Range
The input range can be set based on the application. For
oversampled signal processing in which the input fre-
quency is low (<10MHz), the largest input range will
provide the best signal-to-noise performance while main-
taining excellent SFDR. For high input frequencies
(>10MHz), the 2V range will have the best SFDR perfor-
mance but the SNR will degrade by 1.5dB. See the Typical
Performance Characteristics section.
Driving the Encode Inputs
The noise performance of the LTC1743 can depend on the
encode signal quality as much as on the analog input. The
ENC/ENC inputs are intended to be driven differentially,
primarily for noise immunity from common mode noise
sources. Each input is biased through a 6k resistor to a 2V
bias. The bias resistors set the DC operating point for
transformer coupled drive circuits and can set the logic
threshold for single-ended drive circuits.
VCM
REFHA
REFLB
SENSE
TIE TO VDD FOR 3.2V RANGE;
TIE TO GND FOR 2V RANGE;
RANGE = 2 VSENSE FOR
1V < VSENSE < 1.6V
2.5V
REFLA
REFHB
4.7
F
4.7
F
INTERNAL ADC
HIGH REFERENCE
BUFFER
0.1
F
1743 F05
LTC1743
4
DIFF AMP
1
F
1
F
0.1
F
INTERNAL ADC
LOW REFERENCE
2.5V BANDGAP
REFERENCE
1.6V
1V
RANGE
DETECT
AND
CONTROL
Figure 5. Equivalent Reference Circuit
VCM
SENSE
2.5V
1.1V
4.7
F
14k
1
F
11k
1743 F06a
LTC1743
VCM
SENSE
2.5V
5V
1.25V
6
4
1, 2
4.7
F
1
F
0.1
F
1743 F06b
LTC1743
LT1790-1.25
Figure 6a. 2.2V Range ADC
Figure 6b. 2.5V Range ADC with an External Reference
相關PDF資料 |
PDF描述 |
|---|---|
| ADAU1401AWBSTZ | IC AUDIO PROC 28/56BIT 48LQFP |
| MS27656E15B97P | CONN RCPT 12POS WALL MNT W/PINS |
| MS27472T22B21PA | CONN RCPT 21POS WALL MT W/PINS |
| MS3108E18-5S | CONN PLUG 3POS RT ANG W/SCKT |
| MS3101A32-13P | CONN RCPT 23POS FREE HNG W/PINS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1743IFW | 功能描述:IC ADC 12BIT 50MSPS SMPL 48TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1743IFW#PBF | 功能描述:IC ADC 12BIT 50MSPS SMPL 48TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| LTC1743IFW#TR | 功能描述:IC ADC 12BIT 50MSPS SMPL 48TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1743IFW#TRPBF | 功能描述:IC ADC 12BIT 50MSPS SMPL 48TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| LTC1744CFW | 功能描述:IC ADC 14BIT 50MSPS 48-TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
發布緊急采購，3分鐘左右您將得到回復。