- 您現在的位置：買賣IC網 > PDF目錄44985 > LT3645EUD#TRPBF (LINEAR TECHNOLOGY CORP) 1.25 A SWITCHING REGULATOR, 825 kHz SWITCHING FREQ-MAX, PQCC16 PDF資料下載
參數資料
| 型號： | LT3645EUD#TRPBF |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | 穩壓器 |
| 英文描述： | 1.25 A SWITCHING REGULATOR, 825 kHz SWITCHING FREQ-MAX, PQCC16 |
| 封裝： | 3 X 3 MM, LEAD FREE, PLASTIC, MO-220WEED-2, QFN-16 |
| 文件頁數： | 22/24頁 |
| 文件大?。?/td> | 296K |
| 代理商： | LT3645EUD#TRPBF |
LT3645
7
3645f
PIN FUNCTIONS
EN/UVLO (Pin 1/Pin 5): The EN/UVLO pin is used to enable
the buck switching regulator and the low dropout linear
regulator (LDO). An accurate threshold of 1.23V allows the
user to set the undervoltage lockout point with a simple
resistor divider, see Precision Undervoltage Lockout sec-
tion for more information. The EN/UVLO pin can be tied
directly to VIN if the UVLO or shutdown is not used.
FB (Pin 2/Pin 6): The FB pin programs the buck output
voltage. The LT3645 regulates the FB pin to 0.8V. The
feedback resistor divider tap should be connected to this
pin. The output voltage is programmed according to the
following equation:
R1
= R2
VOUT
0.8
–1
where R1 connects between OUT and FB and R2 connects
between FB and GND. A good value for R2 is 10k.
GND(Pin3,ExposedPadPin13/Pin7,ExposedPadPin17):
The GND pin should be tied to a local ground plane below the
LT3645 and the circuit components. Return the feedback
dividers from FB and FB2 to this pin. The exposed pad
must be soldered to the PCB and electrically connected
to ground. Use a large ground plane and thermal vias to
optimize thermal performance.
DA (Pin 4/Pin 8): The DA pin senses the external catch
diode current and prevents the buck regulator from switch-
ing if the sensed current is too high. Connect the anode
of the external Schottky catch diode to this pin.
BOOST (Pin 5/Pin 10): The BOOST pin provides a drive
voltage to the internal bipolar NPN power switch. Tie a
0.1μF capacitor between the BOOST and SW pins.
SW (Pin 6/Pin 9): The SW pin is the output of the internal
buck power switch. Connect the inductor and the cathode
of the external catch Schottky diode to this pin.
VIN (Pin 7/ Pin 11): The VIN pin supplies current to the
LT3645’s internal circuitry, to the internal buck power
switch, and to the LDO. The VIN pin must be locally
bypassed.
VCC2 (Pin 8/Pin 14): The VCC2 pin supplies current to the
linear regulator’s output device. The VCC2 pin is also the
anode of an internal Schottky diode used to generate the
BOOST voltage. The VCC2 pin must be tied to a voltage
source greater than 2.5V to utilize the internal Schottky
boost diode. If the VCC2 pin is tied to a voltage lower than
2.5V, then an external Schottky diode must be connected
between a power supply greater than 2.5V (anode) and
the BOOST pin (cathode). Bypass this pin to ground with
a 0.1μF capacitor close to the part.
OUT2 (Pin 9/Pin 15): The OUT2 pin is the output of the
LDO. Connect a capacitor of at least 0.47μF from this pin
to ground. See Frequency Compensation (LDO) section
for more details.
FB2 (Pin 10/Pin 16): The FB2 pin programs the LDO output
voltage. The LT3645 regulates the FB2 pin to 0.797V. The
feedback resistor divider tap should be connected to this
pin. The output voltage is programmed according to the
following equation:
R3
= R4
VOUT2
0.797
–1
where R3 connects between OUT2 and FB2 and R4
connects between FB2 and GND. A good value for R4 is
10k.
EN2 (Pin 11/Pin 4): The EN2 pin is used to enable the linear
regulator. Pull this pin above 1.6V to enable the LDO. Pull
EN2 below 0.5V to disable the LDO.
NPG (Pin 12/Pin 3): The NPG pin is an open-collector
output used to indicate that both buck and LDO output
voltages are in regulation. The NPG pin pulls low when
FB and FB2 both exceed 720mV.
NC (Pins 1, 2, 12, 13, QFN Only): No Connect Pins. Tie
these to ground.
(MSOP/QFN)
相關PDF資料 |
PDF描述 |
|---|---|
| LT3645EMSE#TRPBF | 1.25 A SWITCHING REGULATOR, 825 kHz SWITCHING FREQ-MAX, PDSO12 |
| LT3651IUHE-4.2#PBF | BATTERY CHARGE CONTROLLER, 1100 kHz SWITCHING FREQ-MAX, PQCC36 |
| LT3651IUHE-4.2#TRPBF | BATTERY CHARGE CONTROLLER, 1100 kHz SWITCHING FREQ-MAX, PQCC36 |
| LT3651IUHE-4.1#TRPBF | BATTERY CHARGE CONTROLLER, 1100 kHz SWITCHING FREQ-MAX, PQCC36 |
| LT3651EUHE-4.1#PBF | BATTERY CHARGE CONTROLLER, 1100 kHz SWITCHING FREQ-MAX, PQCC36 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LT3645HMSE#PBF | 功能描述:IC REG DL BUCK/LINEAR 12-MSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 + 切換式 系列:- 標準包裝:2,500 系列:- 拓撲:降壓（降壓）同步（3），線性（LDO）（2） 功能:任何功能 輸出數:5 頻率 - 開關:300kHz 電壓/電流 - 輸出 1:控制器 電壓/電流 - 輸出 2:控制器 電壓/電流 - 輸出 3:控制器 帶 LED 驅動器:無 帶監控器:無 帶序列發生器:是 電源電壓:5.6 V ~ 24 V 工作溫度:-40°C ~ 85°C 安裝類型:* 封裝/外殼:* 供應商設備封裝:* 包裝:* |
| LT3645HMSE#TRPBF | 功能描述:IC REG DL BUCK/LINEAR 12-MSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 + 切換式 系列:- 標準包裝:2,500 系列:- 拓撲:降壓（降壓）同步（3），線性（LDO）（2） 功能:任何功能 輸出數:5 頻率 - 開關:300kHz 電壓/電流 - 輸出 1:控制器 電壓/電流 - 輸出 2:控制器 電壓/電流 - 輸出 3:控制器 帶 LED 驅動器:無 帶監控器:無 帶序列發生器:是 電源電壓:5.6 V ~ 24 V 工作溫度:-40°C ~ 85°C 安裝類型:* 封裝/外殼:* 供應商設備封裝:* 包裝:* |
| LT3645IMSE#PBF | 功能描述:IC REG DL BUCK/LINEAR 12-MSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 + 切換式 系列:- 標準包裝:2,500 系列:- 拓撲:降壓（降壓）同步（3），線性（LDO）（2） 功能:任何功能 輸出數:5 頻率 - 開關:300kHz 電壓/電流 - 輸出 1:控制器 電壓/電流 - 輸出 2:控制器 電壓/電流 - 輸出 3:控制器 帶 LED 驅動器:無 帶監控器:無 帶序列發生器:是 電源電壓:5.6 V ~ 24 V 工作溫度:-40°C ~ 85°C 安裝類型:* 封裝/外殼:* 供應商設備封裝:* 包裝:* |
| LT3645IMSE#TRPBF | 功能描述:IC REG DL BUCK/LINEAR 12-MSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 + 切換式 系列:- 標準包裝:2,500 系列:- 拓撲:降壓（降壓）同步（3），線性（LDO）（2） 功能:任何功能 輸出數:5 頻率 - 開關:300kHz 電壓/電流 - 輸出 1:控制器 電壓/電流 - 輸出 2:控制器 電壓/電流 - 輸出 3:控制器 帶 LED 驅動器:無 帶監控器:無 帶序列發生器:是 電源電壓:5.6 V ~ 24 V 工作溫度:-40°C ~ 85°C 安裝類型:* 封裝/外殼:* 供應商設備封裝:* 包裝:* |
| LT3645IUD#PBF | 功能描述:IC REG DL BUCK/LINEAR 16-QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 + 切換式 系列:- 標準包裝:2,500 系列:- 拓撲:降壓（降壓）同步（3），線性（LDO）（2） 功能:任何功能 輸出數:5 頻率 - 開關:300kHz 電壓/電流 - 輸出 1:控制器 電壓/電流 - 輸出 2:控制器 電壓/電流 - 輸出 3:控制器 帶 LED 驅動器:無 帶監控器:無 帶序列發生器:是 電源電壓:5.6 V ~ 24 V 工作溫度:-40°C ~ 85°C 安裝類型:* 封裝/外殼:* 供應商設備封裝:* 包裝:* |
發布緊急采購，3分鐘左右您將得到回復。