參數資料
型號： LT1912EMSE#PBF
廠商： LINEAR TECHNOLOGY CORP
元件分類： 穩壓器
英文描述： 4.2 A SWITCHING REGULATOR, 240 kHz SWITCHING FREQ-MAX, PDSO10
封裝： LEAD FREE, PLASTIC, MSOP-10
文件頁數： 3/24頁
文件大?。?/td> 365K
代理商： LT1912EMSE#PBF
LT1912
11
1912fa
with a lower DCR resulting in higher efficiency. There are
several graphs in the Typical Performance Characteristics
section of this data sheet that show the maximum load
current as a function of input voltage and inductor value
for several popular output voltages. Low inductance may
result in discontinuous mode operation, which is okay
but further reduces maximum load current. For details of
maximum output current and discontinuous mode opera-
tion, see Linear Technology Application Note 44. Finally,
for duty cycles greater than 50% (VOUT/VIN > 0.5), there
is a minimum inductance required to avoid subharmonic
oscillations. See AN19.
Input Capacitor
BypasstheinputoftheLT1912circuitwithaceramiccapaci-
tor of X7R or X5R type. Y5V types have poor performance
over temperature and applied voltage, and should not be
used. A 4.7F to 10F ceramic capacitor is adequate to
bypasstheLT1912andwilleasilyhandletheripplecurrent.
Note that larger input capacitance is required when a lower
switching frequency is used. If the input power source has
high impedance, or there is significant inductance due to
long wires or cables, additional bulk capacitance may be
necessary. This can be provided with a lower performance
electrolytic capacitor.
Step-down regulators draw current from the input sup-
ply in pulses with very fast rise and fall times. The input
capacitor is required to reduce the resulting voltage
ripple at the LT1912 and to force this very high frequency
switching current into a tight local loop, minimizing EMI.
A 4.7F capacitor is capable of this task, but only if it is
placed close to the LT1912 and the catch diode (see the
PCB Layout section). A second precaution regarding the
ceramic input capacitor concerns the maximum input
voltage rating of the LT1912. A ceramic input capacitor
combined with trace or cable inductance forms a high
quality (under damped) tank circuit. If the LT1912 circuit
is plugged into a live supply, the input voltage can ring to
twice its nominal value, possibly exceeding the LT1912’s
voltage rating. This situation is easily avoided (see the Hot
Plugging Safely section).
Output Capacitor and Output Ripple
The output capacitor has two essential functions. Along
withtheinductor,itfiltersthesquarewavegeneratedbythe
LT1912 to produce the DC output. In this role it determines
the output ripple, and low impedance at the switching
frequency is important. The second function is to store
energy in order to satisfy transient loads and stabilize the
LT1912’s control loop. Ceramic capacitors have very low
equivalent series resistance (ESR) and provide the best
ripple performance. A good starting value is:
COUT =
100
VOUTfSW
where fSWisinMHz,andCOUTistherecommendedoutput
capacitance in F. Use X5R or X7R types. This choice will
provide low output ripple and good transient response.
Transientperformancecanbeimprovedwithahighervalue
capacitor if the compensation network is also adjusted
to maintain the loop bandwidth. A lower value of output
capacitor can be used to save space and cost but transient
performance will suffer. See the Frequency Compensation
section to choose an appropriate compensation network.
When choosing a capacitor, look carefully through the
data sheet to find out what the actual capacitance is under
operating conditions (applied voltage and temperature).
A physically larger capacitor, or one with a higher voltage
rating, may be required. High performance tantalum or
electrolyticcapacitorscanbeusedfortheoutputcapacitor.
Low ESR is important, so choose one that is intended for
useinswitchingregulators.TheESRshouldbespecifiedby
the supplier, and should be 0.05Ω or less. Such a capaci-
tor will be larger than a ceramic capacitor and will have a
larger capacitance, because the capacitor must be large to
achieve low ESR. Table 2 lists several capacitor vendors.
APPLICATIONS INFORMATION
相關PDF資料
PDF描述
LT1932ES6#TRM 0.78 A SWITCHING REGULATOR, 1600 kHz SWITCHING FREQ-MAX, PDSO6
LT1933HDCB#TRM 1.05 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO6
LT1933HDCB 1.05 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO6
LT1933HS6 1.05 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO6
LT1933IDCB#PBF 1.05 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO6
相關代理商/技術參數
參數描述
LT1912EMSE-TRPBF 制造商:LINER 制造商全稱:Linear Technology 功能描述:36V, 2A, 500kHz Step-Down Switching Regulator
LT1913 制造商:LINER 制造商全稱:Linear Technology 功能描述:25V, 3.5A, 2.4MHz Step-Down Switching Regulator
LT1913EDD#PBF 功能描述:IC REG BUCK ADJ 3.5A 10DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 標準包裝:250 系列:- 類型:降壓（降壓） 輸出類型:固定 輸出數:1 輸出電壓:1.2V 輸入電壓:2.05 V ~ 6 V PWM 型:電壓模式 頻率 - 開關:2MHz 電流 - 輸出:500mA 同步整流器:是 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:6-UFDFN 包裝:帶卷 (TR) 供應商設備封裝:6-SON（1.45x1） 產品目錄頁面:1032 (CN2011-ZH PDF) 其它名稱:296-25628-2
LT1913EDD#TRPBF 功能描述:IC REG BUCK ADJ 3.5A 10DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 設計資源:Design Support Tool 標準包裝:1 系列:- 類型:升壓（升壓） 輸出類型:固定 輸出數:1 輸出電壓:3V 輸入電壓:0.75 V ~ 2 V PWM 型:- 頻率 - 開關:- 電流 - 輸出:100mA 同步整流器:是 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-5 細型，TSOT-23-5 包裝:剪切帶 (CT) 供應商設備封裝:TSOT-23-5 其它名稱:AS1323-BTTT-30CT
LT1913EDD-PBF 制造商:LINER 制造商全稱:Linear Technology 功能描述:25V, 3.5A, 2.4MHz Step-Down Switching Regulator
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*