![](http://datasheet.mmic.net.cn/30000/LSN-1-10-D12BJ_datasheet_2356554/LSN-1-10-D12BJ_12.png)
LSN-10A D12 Series
N O N - I S O L A T E D , 1 0 - 5 0 W S I P D C / D C C O N V E R T E R S
DS-0514E
01/05
12
Maximum Rated Output
Current in Amps
P A R T
N U M B E R
S T R U C T U R E
Non-Isolated SIP
Output
Conguration:
L = Unipolar
Low Voltage
Nominal Output Voltage:
1, 1.1, 1.2, 1.3, 1.5, 1.8, 2, 2.5, 3.3
or 5 Volts
Input Voltage Range:
D12 = 10.8 to 13.2 Volts
(12V nominal)
L SN
10
-
/
D12 B
-
1.8
B Sufx:
No Remote Sense
(Pin 3 removed)
H
Functional Options
Remote Sense Pin Removed ("B" sufx)
These devices have their +Sense pin (pin 3) removed, and the feedback
loop is closed through the +VOUT path. The 10.5
resistor in Figure 1 is
installed in both standard and "B" models. See the Output Sense Function.
Horizontal Mounting ("H" sufx)
This packaging conguration reduces above-board height to 0.35" (8.89mm),
including the isolating pad. For "H" models, a thermally conductive, electri-
cally insulating "pad" is factory installed on the output inductor. The pad
material is Bergquist Sil Pad 400. The pad size is 0.4 x 0.5 x 0.009 inches
(10.16 x 12.7 x 0.23mm). This conguration can signicantly improve thermal
performance. See Thermal Derating for details.
Reversed pin vertical mounting ("J" sufx)
This additional mechanical conguration consists of a low-prole pin header
attached to the reverse side of the converter. It allows the LSN series to be
mechanically compatible with competitors' "keep out area."
Other Options and Modications
Other options include a positive polarity (pull low to disable) on the On/Off
Control. Contact DATEL directly to discuss these and other possible modi-
cations.
Examples
LSN-1.8/10-D12
Vertical-mount. Sense function on pin 3. No pin 9.
LSN-1.8/10-D12B Vertical-mount. Pin 3 (+Sense) removed. No pin 9.
LSN-1.8/10-D12H Horizontal-mount. Sense function on pin 3. No pin 9.
LSN-1.8/10-D12BH Horizontal-mount. Pin 3 (+Sense) removed. No pin 9.
LSN-1.8/10-D12J
Reverse pin vertical-mount. Sense function on pin 3.
No pin 9.
H Sufx:
Horizontal Mount
J
J Sufx:
Reversed Pin
Vertical Mount
DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein
do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.
DATEL (UK) LTD. Tadley, England Tel: (01256)-880444
Internet: www.datel-europe.com E-mail: datel.ltd@datel.com
DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: 01-34-60-01-01
Internet: www.datel-europe.com E-mail: datel.sarl@datel.com
DATEL GmbH München, Germany Tel: 89-544334-0
Internet: www.datel-europe.com E-mail: datel.gmbh@datel.com
DATEL KK Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-6354-2025
Internet: www.datel.co.jp Email: salestko@datel.co.jp, salesosa@datel.co.jp
DATEL China Shanghai, China Tel: 011-86-51317131
E-mail: davidx@datel.com
DATEL, Inc. 11 Cabot Boulevard, Manseld, MA 02048-1151
Tel: (508) 339-3000
(800) 233-2765
Fax: (508) 339-6356
www.datel.com
Email: sales@datel.com
www.cdpowerelectronics.com
ISO 9001 REGISTERED
A SUBSIDIARY OF C&D TECHNOLOGIES