![](http://datasheet.mmic.net.cn/200000/JANHCA2N5339_datasheet_15070557/JANHCA2N5339_18.png)
MIL-PRF-19500/560E
18
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements
are maintained by the Inventory Control Point's packaging activity within the Military Department or Defense Agency,
or within the Military Department's System Command. Packaging data retrieval is available from the managing
Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The notes specified in MIL-PRF-19500 are applicable to this specification.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of this specification.
b.
Issue of DODISS to be cited in the solicitation and if required, the specific issue of individual documents
referenced (see 2.2.1).
c.
The lead finish as specified (see 3.4.1).
d.
Type designation and quality assurance level.
e.
Packaging requirements (see 5.1).
f.
For die acquisition, the JANHC or JANKC letter version shall be specified (see figures 2 and 3).
6.3 Qualification. With respect to products requiring qualification, awards will be made only for products which
are, at the time of award of contract, qualified for inclusion in Qualified Manufacturer’s List QML No.19500 whether or
not such products have actually been so listed by that date. The attention of the contractors is called to these
requirements, and manufacturers are urged to arrange to have the products that they propose to offer to the Federal
Government tested for qualification in order that they may be eligible to be awarded contracts or orders for the
products covered by this specification. Information pertaining to qualification of products may be obtained from
Defense Supply Center, Columbus, ATTN: DSCC-VQE, P.O. Box 3990, Columbus, OH 43216-5000.
6.4 Application guidance. The following PNP type transistor is complimentary to the NPN device listed herein.
NPN
PNP
2N5339
2N6193
6.5 Suppliers of JANHC and JANKC die. The qualified die suppliers with the applicable letter version (example,
JANHCA2N6193) will be identified on the QML.
JANC ordering information
PIN
Manufacturers
33178
34156
43611
2N5339
JANHCA2N5339
JANKCA2N5339
JANHCB2N5339
JANKCB2N5339
JANHCC2N5339
JANKCC2N5339