參數資料
型號： JANHCA2N6794
英文描述： TRANSISTOR | MOSFET | N-CHANNEL | 500V V(BR)DSS | 1.5A I(D) | TO-39
中文描述： 晶體管| MOSFET的| N溝道| 500V五（巴西）直| 1.5AI（四）| TO - 39封裝
文件頁數： 3/23頁
文件大?。?/td> 135K
代理商： JANHCA2N6794
MIL-PRF-19500/545D
11
4.3.2. Power burn-in conditions. Power burn-in conditions are as follows: VCB = 10 - 30 V dc TA = room ambient
as defined in the general requirements, paragraph 4.5 of MIL-STD-750. Power shall be applied to the device to
achieve a Junction temperature, TJ=175 °C minimum and a minimum PD = 75% of PT maximum rated as defined
in paragraph 1.3 herein.
4.4. Conformance inspection. Conformance inspection shall be as specified herein.
4.4.1. Group A inspection. Group A inspection shall be conducted in accordance with MIL-PRF-19500 and table I
herein. Electrical measurements (end-points) shall be in accordance with the inspections of table I, subgroup 2 herein.
4.4.2. Group B inspection. Group B inspection shall be conducted in accordance with the conditions specified for
subgroup testing in table VIa of MIL-PRF-19500 (JANS) and 4.4.2.1 herein. Electrical measurements (end-points)
shall be in accordance with group A, subgroup 2 herein. Delta measurements shall be in accordance with table II
herein. See 4.4.2.2 herein and table VIb of MIL-PRF-19500 for JAN, JANTX, and JANTXV group B testing.
Electrical measurements (end-points) requirements shall be in accordance with group A, subgroup 2 herein. Delta
measurements shall be in accordance with table II herein.
4.4.2.1. Group B inspection table VIa (JANS) of MIL-PRF-19500.
Subgroup
Method
Conditions
B4
1037
VCB = 40 V dc ± 1 V.
B5
1027
VCB = 10 V dc; 96 hours with PT = PT (max) at TA = 25°C, adjust TA to give TJ =
+275
°C minimum. Optionally the test may be performed for a minimum of 216 hours
with PT adjusted to achieve a TJ = +225°C minimum; sample size = 45, c = 0. In this
case the ambient temperature shall be adjusted such that a minimum 75 percent of
maximum rated PT (see1.3) is applied to the device under test.
(NOTE: If a failure occurs, resubmission shall be at the test conditions of the original
sample.)
B6
3131
see 4.5.2.
4.4.2.2. Group B inspection, (JAN, JANTX, and JANTXV). Separate samples may be used for each step. In the
event of a group B failure, the manufacturer may pull a new sample at double size from either the failed assembly lot
or from another assembly lot from the same wafer lot. If the new “assembly lot” option is exercised, the failed
assembly lot shall be scrapped.
Step
Method
Conditions
1
1039
Steady-state life: Test condition B, 340 hours min., VCB = 10 - 30 V dc, Power shall be
applied to achieve TJ = +175°C minimum using a minimum of PD = 75 percent of
maximum rated PT as defined in 1.3. n = 45 devices, c = 0.
2
1039
The steady-state life test of step 1 shall be extended to 1,000 hrs for each die design.
Samples shall be selected from a wafer lot every twelve months of wafer production.
Group B step 2 shall not be required more than once for any single wafer lot. n = 45,
c = 0.
3
1032
High-temperature life (non-operating), t = 340 hours, TA = +200°C. n = 22, c = 0.
相關PDF資料
PDF描述
JANS2N2221A TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | TO-18
JANS2N2221AL TRANSISTOR | BJT | NPN | 50V V(BR)CEO | 800MA I(C) | TO-206AA
JANS2N2221AUA TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | SMT
JANS2N2221AUB TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | CHIP
JANS2N2222A TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | TO-18
相關代理商/技術參數
參數描述
JANHCA2N6796 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRANSISTOR | MOSFET | N-CHANNEL | 100V V(BR)DSS | 8A I(D) | TO-39
JANHCA2N6798 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRANSISTOR | MOSFET | N-CHANNEL | 200V V(BR)DSS | 5.5A I(D) | TO-39
JANHCA2N6800 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRANSISTOR | MOSFET | N-CHANNEL | 400V V(BR)DSS | 3A I(D) | TO-39
JANHCA2N6802 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRANSISTOR | MOSFET | N-CHANNEL | 500V V(BR)DSS | 3.5A I(D) | TO-39
JANHCA2N6804 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRANSISTOR | MOSFET | P-CHANNEL | 100V V(BR)DSS | 11A I(D) | TO-204AA
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*