![](http://datasheet.mmic.net.cn/200000/JANHCA2N5151_datasheet_15070531/JANHCA2N5151_21.png)
MIL-PRF-19500/545D
21
5. PACKAGING
5.1. Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements
are maintained by the Inventory Control Points' packaging activity within the Military Department or Defense Agency,
or within the Military Departments' System Command. Packaging data retrieval is available from the managing
Military Departments' or Defense Agency's automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1. Intended use. The notes specified in MIL-PRF-19500 are applicable to this specification.
6.2. Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of this specification.
b.
Issue of DoDISS to be cited in the solicitation and, if required, the specified issue of individual documents
referenced (see 2.2.1).
c.
Lead finish (see 3.4.2).
d.
Type designation and product assurance level.
e. Packaging requirements (see 5.1).
6.3 Qualification. With respect to products requiring qualification, awards will be made only for products which
are, at the time of award of contract, qualified for inclusion in Qualified Manufacturers List QML-19500 whether or not
such products have actually been so listed by that date. The attention of the contractors is called to these
requirements, and manufacturers are urged to arrange to have the products that they propose to offer to the Federal
Government tested for qualification in order that they may be eligible to be awarded contracts or orders for the
products covered by this specification. Information pertaining to qualification of products may be obtained from
Defense Supply Center, Columbus, ATTN: DSCC-VQE, P.O. Box 3990, Columbus, OH 43216-5000.
6.4. Suppliers of JANHC and JANKC die. The qualified JANHC and JANKC suppliers with the applicable letter
version (example JANHCA2N5151) will be identified on the QML.
JANHC and JANKC ordering information
Manufacturer
PIN
33178
34156
43611
2N5151
2N5153
JANHCA2N5151
JANHCA2N5153
JANHCB2N5151
JANHCB2N5153
JANHCC2N5151
JANHCC2N5153
2N5151
2N5153
JANKCA2N5151
JANKCA2N5153
JANKCB2N5151
JANKCB2N5153
JANHCC2N5151
JANHCC2N5153
6.5. Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue due to the extensiveness of the changes.