4
FN6916.0
September 23, 2009
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise
noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Absolute Maximum Ratings (TA = +25°C)
Thermal Information
VS+ to VS- Supply Voltage . . . . . . . . . . . . -0.3V to +26.4V
VS+ Voltage to GND . . . . . . . . . . . . . . . . . -0.3V to +26.4V
VS- Voltage to GND . . . . . . . . . . . . . . . . . -26.4V to +0.3V
Driver VIN+ Voltage . . . . . . . . . . . . . . . . . . . . . VS- to VS+
C0, C1 Voltage to GND . . . . . . . . . . . . . . . . . .-0.3V to +6V
IADJ Voltage to GND . . . . . . . . . . . . . . . . . . . . . -1V to +4V
ESD Rating
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V
Human Body Model (Per MIL-STD-883 Method 3015.7). . 3kV
Charge Device Model . . . . . . . . . . . . . . . . . . . . . . 1.5kV
Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . -40°C to +85°C
Junction Temperature Range . . . . . . . . . . . -40°C to +150°C
Thermal Resistance (Typical)
θJA (°C/W) θJC (°C/W)
24 Ld QFN Package (Notes
4, 5) . .
39
4.5
24 Ld HTSSOP Package (Notes
4,
5)TBD
Maximum Junction Temperature (Plastic Package). . . +150°C
Current into any Input . . . . . . . . . . . . . . . . . . . . . . . . 8mA
Continuous Output Current for Long Term Reliability . . . . 50mA
Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . See Figure
42Storage Temperature Range . . . . . . . . . . . -40°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTES:
4. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. QFN and HTSSOP
exposed pad soldered to PCB per JESD51-5. See Tech Brief TB379 for details.
5. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications VS = ±12V, RL= 100Ω differential, IADJ = C0 = C1 = 0V, AV = 10V/V, RF = 3.2kΩ,
TA = +25°C. Amplifier pairs tested separately unless otherwise indicated.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
AC PERFORMANCE
BW
-3dB Small Signal Bandwidth VO < 2VP-P-DIFF, AV = 10
240
MHz
120
MHz
-3dB Large Signal Bandwidth VO = 10VP-P-DIFF
100
MHz
SR
20% to 80%
VO = 32VP-P-DIFF
2000
3000
V/s
200kHz Harmonic
Distortion
2nd Harmonic
VOUT = 10VP-P-DIFF
-93
dBc
3rd Harmonic
VOUT = 10VP-P-DIFF
-90
dBc
THD
VOUT = 10VP-P-DIFF
-88
dBc
1MHz Harmonic
Distortion
2nd Harmonic
VOUT = 2VP-P-DIFF
-91
dBc
3rd Harmonic
VOUT = 2VP-P-DIFF
-109
dBc
THD
VOUT = 2VP-P-DIFF
-91
dBc
8MHz Harmonic
Distortion
2nd Harmonic
VOUT = 2VP-P-DIFF
-87
dBc
3rd Harmonic
VOUT = 2VP-P-DIFF
-95
dBc
THD
VOUT = 2VP-P-DIFF
-86
dBc
MTPR
Multi-Tone Power Ratio
26kHz to 8MHz, 4kHz Tone Spacing,
PLINE = 19dBm, VDSL2+ 8b (Note 6) -70
dBc
200kHz Harmonic
Distortion
2nd Harmonic
VOUT = 10VP-P-DIFF (Note 6) -93
dBc
3rd Harmonic
VOUT = 10VP-P-DIFF (Note 6) -90
dBc
THD
VOUT = 10VP-P-DIFF (Note 6) -88
dBc
ISL1539A