when the ISL12008 switches from V" />
參數資料
型號: ISL12008IB8Z-T
廠商: Intersil
文件頁數: 19/19頁
文件大小: 0K
描述: IC RTC I2C LO-POWER 8-SOIC
標準包裝: 2,500
類型: 時鐘/日歷
特點: 警報器,閏年
時間格式: HH:MM:SS:hh(24 小時)
數據格式: YY-MM-DD-dd
接口: I²C,2 線串口
電源電壓: 2.7 V ~ 5.5 V
電壓 - 電源,電池: 1.8 V ~ 5.5 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 8-SOIC(0.154",3.90mm 寬)
供應商設備封裝: 8-SOIC
包裝: 帶卷 (TR)
9
FN6690.1
September 26, 2008
Also provided is the ability to adjust the crystal capacitance
when the ISL12008 switches from VDD to battery backup
Register Descriptions
The battery-backed registers are accessible following a
slave byte of “1101000x” and reads or writes to addresses
[00h:1Fh]. The defined addresses and default values are
described in Table 1. Address 12h to 1Eh are not used.
Reads or writes to 12h to 1Eh will not affect operation of the
device but should be avoided.
REGISTER ACCESS
The contents of address 00h to 07h can be modified by
performing a byte or a page write operation directly to any
register address. In a page write operation to address 00h to
07h, the address will wrap around from 07h to 00h. All the
other registers (Address 08h to 11h and 1Fh) can be
modified by performing a byte write operation.
The registers are divided into 3 sections. These are:
1. Real Time Clock (8 bytes): Address 00h to 06h, and 1Fh.
Address 1Fh is Sub-Second register and it is a read-only.
2. Control and Status (4 bytes): Address 07h to 0Bh.
3. Alarm (6 bytes): Address 0Ch to 11h.
There are no addresses above 1Fh.
Address 12h to 1Eh are not used. Reads or writes to 12h to
1Eh will not affect operation of the device but should be
avoided.
A register can be read by performing a random read at any
address at any time. This returns the contents of that register
location. Additional registers are read by performing a
sequential read. For the RTC and Alarm registers, the read
operation latches all clock registers into a buffer, so an
update of the clock does not change the time being read. A
sequential read will not result in the output of data from the
memory array. At the end of a read, the master supplies a
stop condition to end the operation and free the bus. After a
read, the address remains at the previous address +1 so the
user can execute a current address read and continue
reading the next register. In a sequential read, the address
will warp around at address 07h to 00h; therefore, please
use byte read operation to read the registers after
address 07h.
ISL12008
相關PDF資料
PDF描述
ISL1208IB8Z-TKR5291 IC RTC LP BATT BACKED SRAM 8SOIC
AD5258BRMZ50 IC POT DGTL I2C 50K 64P 10MSOP
ISL12058IRTZ IC RTC/CALENDAR I2C-BUS 8-TDFN
VI-J10-MZ CONVERTER MOD DC/DC 5V 25W
ISL12058IRUZ-T IC RTC/CALENDAR I2C-BUS 8-UTDFN
相關代理商/技術參數
參數描述
ISL12020 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Low Power RTC with VDD Battery Backed SRAM and Embedded Temp Compensation 【5ppm with Auto Day Light Saving
ISL12020CBZ 制造商:Rochester Electronics LLC 功能描述: 制造商:Intersil Corporation 功能描述:
ISL12020IBZ 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Low Power RTC with VDD Battery Backed SRAM and Embedded Temp Compensation 【5ppm with Auto Day Light Saving
ISL12020M 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Low Power RTC with Battery Backed SRAM, Integrated ±5ppm Temperature Compensation and Auto Daylight Saving
ISL12020M_11 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:High-Accuracy RTC Modules, Feature-Rich RTCs