www.irf.com
1
3-PHASE BRIDGE DRIVER
Product Summary
Description
Packages
The IRS213(0, 03, 2) are high voltage, high speed
power MOSFET and IGBT drivers with three independent
high and low side referenced output channels. Proprietary
HVIC technology enables ruggedized monolithic
construction. Logic inputs are compatible with CMOS or
LSTTL outputs, down to 2.5 V logic. A ground-referenced
operational amplifier provides analog feedback of bridge
current via an external current sense resistor. A current trip
function which terminates all six outputs is also derived from
this resistor. An open drain FAULT signal indicates if an
over-current or undervoltage shutdown has occurred. The
output drivers feature a high pulse current buffer stage
designed for minimum driver cross-conduction. Propagation
delays are matched to simplify use at high frequencies. The
floating channels can be used to drive N-channel power
MOSFETs or IGBTs in the high side configuration which operates up to 600 V.
Features
Floating channel designed for bootstrap operation
Fully operational to +600 V
Tolerant to negative transient voltage, dV/dt immune
Gate drive supply range from 10 V to 20 V
Undervoltage lockout for all channels
Over-current shutdown turns off all six drivers
Three Independent half-bridge drivers
Matched propagation delay for all channels
2.5 V logic compatible
Outputs out of phase with inputs
Cross-conduction prevention logic
All parts are LEAD-FREE
PRELIMINARY
Data Sheet No. PD60274 revA
IRS2130/IRS21303/IRS2132 (J&S)PbF
V
OFFSET
600 V max.
I
O
+/- (min.)
V
OUT
13 V – 20 V (IRS21303)
t
on/off
(typ.)
500 ns
Deadtime (typ.) 2.0 μs (IRS2130)
0.7 μs (IRS213(2,03))
200 mA / 420 mA
10 V – 20 V (IRS213(0,2))
28-Lead SOIC 28-Lead PDIP
44-Lead PLCC w / o 12 Leads
Typical Connection
Applications:
*Motor Control
*Air Conditioners/ Washing Machines
*General Purpose Inverters
*Micro/Mini Inverter Drives