- 您現在的位置：買賣IC網 > PDF目錄370647 > HN58X2408I (Hitachi,Ltd.) Two-wire serial interface 8k EEPROM(二線串行接口 8k EEPROM) PDF資料下載
參數資料
| 型號： | HN58X2408I |
| 廠商： | Hitachi,Ltd. |
| 英文描述： | Two-wire serial interface 8k EEPROM(二線串行接口 8k EEPROM) |
| 中文描述： | 兩線串行接口8K的EEPROM中（8K的二線串行接口的EEPROM） |
| 文件頁數： | 11/22頁 |
| 文件大?。?/td> | 71K |
| 代理商： | HN58X2408I |
HN58X2408I/HN58X2416I/HN58X2432I/HN58X2464I
11
Device Addressing
The EEPROM device requires an 8-bit device address word following a start condition to enable the chip
for a read or a write operation. The device address word consists of 4-bit device code, 3-bit device address
code and 1-bit read/write(R/W) code. The most significant 4-bit of the device address word are used to
distinguish device type and this EEPROM uses “1010” fixed code. The device address word is followed by
the 3-bit device address code in the order of A2, A1, A0. The device address code selects one device out of
all devices which are connected to the bus. This means that the device is selected if the inputted 3-bit
device address code is equal to the corresponding hard-wired A2-A0 pin status. As for the 8kbit and
16kbit EEPROMs, whole or some bits of their device address code may be used as the memory address
bits. For example, A0 and A1 are used as a8 and a9 for the 8kbit. The 16kbit doesn't use the device
address code instead all 3 bits are used as the memory address bits a8, a9 and a10. The eighth bit of the
device address word is the read/write(R/W) bit. A write operation is initiated if this bit is low and a read
operation is initiated if this bit is high. Upon a compare of the device address word, the EEPROM enters
the read or write operation after outputting the zero as an acknowledge. The EEPROM turns to a stand-by
state if the device code is not “1010” or device address code doesn’t coincide with status of the correspond
hard-wired device address pins A0 to A2.
Device Address Word
Device address word (8-bit)
Device code (fixed)
Device address code*
1
R/W code*
2
32k, 64k
1
0
1
0
A2
A1
A0
R/W
8k
1
0
1
0
A2
a9
a8
R/W
16k
Notes: 1. A2 to A0 are device address and a10 to a8 are memory address.
2. R/W=“1” is read and R/W = “0” is write.
1
0
1
0
a10
a9
a8
R/W
相關PDF資料 |
PDF描述 |
|---|---|
| HN58X2416I | Two-wire serial interface 16k EEPROM(二線串行接口 16k EEPROM) |
| HN58X2464I | Two-wire serial interface 64k EEPROM(二線串行接口 64k EEPROM) |
| HN58X24512FPI | Two-wire serial interface 512k EEPROM (64-kword ⅴ 8-bit) |
| HN58X24512I | Two-wire serial interface 512k EEPROM (64-kword ⅴ 8-bit) |
| HN58X2464FPI | Two-wire serial interface 8k EEPROM (1-kword x 8-bit)/16k EEPROM (2-kword x 8-bit)/32k EEPROM (4-kword x 8-bit)/64k EEPROM(8-kword x 8-bit) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HN58X2408I/HN58X2416IHN58X2432I/HN58X2464I | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
| HN58X2408SFPIE | 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Two-wire serial interface 8k EEPROM (1-kword × 8-bit) 16k EEPROM (2-kword × 8-bit) |
| HN58X2408SI | 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Two-wire serial interface 8k EEPROM (1-kword × 8-bit) 16k EEPROM (2-kword × 8-bit) |
| HN58X2408-SR | 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:Two-wire serial interface 2k / 4k / 8k / 16k / 32k / 64k EEPROM |
| HN58X2408STIE | 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Two-wire serial interface 8k EEPROM (1-kword × 8-bit) 16k EEPROM (2-kword × 8-bit) |
發布緊急采購，3分鐘左右您將得到回復。