- 您現在的位置：買賣IC網 > PDF目錄384423 > HIP6604CR-T (INTERSIL CORP) Synchronous Rectified Buck MOSFET Drivers PDF資料下載
參數資料
| 型號： | HIP6604CR-T |
| 廠商： | INTERSIL CORP |
| 元件分類： | 功率晶體管 |
| 英文描述： | Synchronous Rectified Buck MOSFET Drivers |
| 中文描述： | 0.73 A HALF BRDG BASED MOSFET DRIVER, PQCC16 |
| 封裝： | 4 X 4 MM, PLASTIC, MO-220VGGC, MLFP-16 |
| 文件頁數： | 5/11頁 |
| 文件大?。?/td> | 516K |
| 代理商： | HIP6604CR-T |
5
Functional Pin Description
UGATE (Pin 1), (Pin 16 QFN)
Upper gate drive output. Connect to gate of high-side power
N-Channel MOSFET.
BOOT (Pin 2), (Pin 2 QFN)
Floating bootstrap supply pin for the upper gate drive.
Connect the bootstrap capacitor between this pin and the
PHASE pin. The bootstrap capacitor provides the charge to
turn on the upper MOSFET. A resistor in series with boot
capacitor is required in certain applications to reduce ringing
on the BOOT pin. See the Internal Bootstrap Device section
under DESCRIPTION for guidance in choosing the
appropriate capacitor and resistor values.
PWM (Pin 3), (Pin 3 QFN)
The PWM signal is the control input for the driver. The PWM
signal can enter three distinct states during operation, see the
three-state PWM Input section under DESCRIPTION for further
details. Connect this pin to the PWM output of the controller.
GND (Pin 4), (Pin 4 QFN)
Bias and reference ground. All signals are referenced to this
node.
PGND (Pin 5 QFN Package Only)
This pin is the power ground return for the lower gate driver.
LGATE (Pin 5), (Pin 7 QFN)
Lower gate drive output. Connect to gate of the low-side
power N-Channel MOSFET.
VCC (Pin 6), (Pin 9 QFN)
Connect this pin to a +12V bias supply. Place a high quality
bypass capacitor from this pin to GND.
LVCC (Pin 10 QFN Package Only)
Lower gate driver supply voltage.
PVCC (Pin 7), (Pin 11 QFN)
For the HIP6601A and the HIP6604, this pin supplies the
upper gate drive bias. Connect this pin from +12V down to
+5V.
For the HIP6603A, this pin supplies both the upper and
lower gate drive bias. Connect this pin to either +12V or +5V.
PHASE (Pin 8), (Pin 14 QFN)
Connect this pin to the source of the upper MOSFET and the
drain of the lower MOSFET. The PHASE voltage is
monitored for adaptive shoot-through protection. This pin
also provides a return path for the upper gate drive.
Description
Operation
Designed for versatility and speed, the HIP6601A, HIP6603A
and HIP6604 dual MOSFET drivers control both high-side and
low-side N-Channel FETs from one externally provided PWM
signal.
The upper and lower gates are held low until the driver is
initialized. Once the VCC voltage surpasses the VCC Rising
Threshold (See Electrical Specifications), the PWM signal
takes control of gate transitions. A rising edge on PWM
initiates the turn-off of the lower MOSFET (see Timing
Diagram). After a short propagation delay [t
PDLLGATE
], the
lower gate begins to fall. Typical fall times [t
FLGATE
] are
provided in the Electrical Specifications section. Adaptive
shoot-through circuitry monitors the LGATE voltage and
determines the upper gate delay time [t
PDHUGATE
] based
on how quickly the LGATE voltage drops below 2.2V. This
prevents both the lower and upper MOSFETs from
conducting simultaneously or shoot-through. Once this delay
period is complete the upper gate drive begins to rise
[t
RUGATE
] and the upper MOSFET turns on.
Timing Diagram
PWM
UGATE
LGATE
t
PDLLGATE
t
FLGATE
t
PDHUGATE
t
RUGATE
t
PDLUGATE
t
FUGATE
t
PDHLGATE
t
RLGATE
HIP6601A, HIP6603A, HIP6604
相關PDF資料 |
PDF描述 |
|---|---|
| HIP6603ACB-T | MIL-DTL-38999 JT06 SERIES CLASS RE STRAIGHT PLUGS, STRAIGHT BODY STYLE, CRIMP TERMINATION, 14 SHELL SIZE, 14-15 INSERT ARRANGEMENT, PLUG GENDER, 15 CONTACTS RoHS Compliant: No |
| HIP6601 | 150000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN |
| HIP6601ACB | Synchronous Rectified Buck MOSFET Drivers |
| HIP6601CB | 150000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN |
| HIP6601ECB | Synchronous Rectified Buck MOSFET Drivers |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HIP-6V | 制造商:Belden Inc 功能描述: |
| HIP7010 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:J1850 Byte Level Interface Circuit |
| HIP7010B | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:J1850 Byte Level Interface Circuit |
| HIP7010P | 制造商:Rochester Electronics LLC 功能描述:J1850 JBLIC (DIP) - Bulk |
| HIP7010P WAF | 制造商:Harris Corporation 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。