
2-311
HIP6028
Advanced PWM and Dual Linear Power
Control with Integrated ACPI Support
Interface
The HIP6028 provides the power control and protection for
three output voltages in high-performance microprocessor
and computer applications. The IC integrates a PWM
controller, a linear regulator and a linear controller as well as
the monitoring and protection functions into a single
package. The PWM controller regulates the microprocessor
core voltage with a synchronous-rectified buck converter.
The linear controller regulates power for the GTL bus and
the linear regulator provides power for the clock driver circuit.
The HIP6028 includes an Intel-compatible, TTL 5-input
digital-to-analog converter (DAC) that adjusts the core PWM
output voltage from 2.1V
DC
to 3.5V
DC
in 0.1V increments
and from 1.3V
DC
to 2.05V
DC
in 0.05V steps. The precision
reference and voltage-mode control provide
±
1% static
regulation. The linear regulator uses an internal pass device
to provide a fixed 2.5V
±
2.5%. The linear controller drives an
external N-channel MOSFET to provide a fixed 1.5V
±
2.5%.
The HIP6028 monitors all the output voltages. A single
Power Good signal is issued when the core is within
±
10% of
the DAC setting and the other levels are above their under-
voltage levels. Additional built-in over-voltage protection for
the core output uses the lower MOSFET to prevent output
voltages above 115% of the DAC setting. The PWM over-
current function monitors the output current by using the
voltage drop across the upper MOSFET’s r
DS(ON)
,
eliminating the need for a current sensing resistor.
The HIP6028 offers integrated ACPI S3 shutdown state
support. Through the SD1&3 pin, the microprocessor core
and GTL bus supplies can be shut down when entering
power-saving standby operation mode.
Features
Provides 3 Regulated Voltages
- Microprocessor Core, Clock and GTL Power
Integrated ACPI S3-State Shutdown Support
Drives Low Cost Transistors
- PWM Controller Drives N-MOSFETs
- Linear Controller Compatible with Both MOSFETs and
NPN Bipolar Transistors
Operates from +3.3V, +5V and +12V Inputs
Simple Control Design
- Single-Loop Voltage-Mode PWM Control
- Fixed 1.5V GTL Output Voltage
- Fixed 2.5V Clock Output Voltage
Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
Excellent Output Voltage Regulation
- Core PWM Output:
±
1% Over Temperature
- Other Outputs:
±
2.5% Over Temperature
TTL-compatible 5-Bit Digital-to-Analog Core Output
Voltage Selection
- Wide Range . . . . . . . . . . . . . . . . . . . 1.3V
DC
to 3.5V
DC
Power-Good Output Voltage Monitor
Microprocessor Core Voltage Protection Against Shorted
MOSFET
Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element,
Uses MOSFET’s r
DS(ON)
Small Converter Size
- Constant Frequency Operation; 200kHz Free-Running
Oscillator; Programmable from 50kHz to 1MHz
Applications
Full Motherboard Power Regulation for Computers
Low-Voltage Distributed Power Supplies
Pinout
HIP6028 (SOIC)
TOP VIEW
Ordering Information
PART NUMBER
TEMP.
RANGE
(
o
C)
PACKAGE
PKG. NO.
HIP6028CB
0 to 70
24 Ld SOIC
M24.3
HIP6028EVAL1
Evaluation Board
VCC
VID4
VID3
VID2
RT
SD1&3
VIN2
UGATE
OCSET
PGND
LGATE
GND
VSEN3
VOUT2
PHASE
24
23
22
21
20
19
18
17
16
15
1
2
3
4
5
6
7
8
9
10
11
12
14
13
FAULT
VID1
SS
FB
DRIVE3
VID0
PGOOD
VSEN1
COMP
Data Sheet
May 1998
File Number
4630
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207
|
Copyright
Intersil Corporation 1999