1
Description
The
Interface Circuit integrates most of the BORSCHT functions
on a monolithic IC. The device is manufactured in a
Dielectric Isolation (DI) process and is designed for use as a
high voltage interface between the traditional telephone
subscriber pair (Tip and Ring) and the low voltage filtering
and coding/decoding functions of the line card. Together with
a secondary protection diode bridge and “feed” resistors, the
device will withstand 1000V lightning induced surges, in
plastic packages. The SLIC also maintains specified
transmission performance in the presence of externally
induced longitudinal currents. The BORSCHT functions that
the SLIC provides are:
HC4P5509A1R3060
telephone
Subscriber
Line
Battery Feed with Subscriber Loop Current Limiting
Overvoltage Protection
Ring Relay Driver
Supervisory Signaling Functions
Hybrid Functions (with External Op Amp)
Test (or Battery Reversal) Relay Driver
In addition, the SLIC provides selective denial of power to
subscriber loops, a programmable subscriber loop current
limit from 20mA to 60mA, a thermal shutdown with an alarm
output and line fault protection. Switch hook detection, ring
trip detection and ground key detection functions are also
incorporated in the SLIC device.
The HC4P5509A1R3060 SLIC is ideally suited for line card
designs in PBX and CO systems, replacing traditional
transformer solutions.
Ordering Information
PART NUMBER
TEMP.
RANGE (
o
C)
PACKAGE
PKG.
NO.
HC4P5509A1R3060
0 to 75
28 Ld PLCC
N28.45
June 1997
HC5509A1R3060
SLIC
Subscriber Line Interface Circuit
Features
DI Monolithic High Voltage Process
Compatible with Worldwide PBX and CO Performance
Requirements
Controlled Supply of Battery Feed Current with
Programmable Current Limit
Operates with 5V Positive Supply (V
B+
)
Internal Ring Relay Driver and a Utility Relay Driver
High Impedance Mode for Subscriber Loop
High Temperature Alarm Output
Low Power Consumption During Standby Functions
Switch Hook, Ground Key, and Ring Trip Detection
Selective Power Denial to Subscriber
Voice Path Active During Power Denial
On Chip Op Amp for 2-Wire Impedance Matching
Applications
Solid State Line Interface Circuit for PBX or Central
Office Systems, Digital Loop Carrier Systems
Hotel/Motel Switching Systems
Direct Inward Dialing (DID) Trunks
Voice Messaging PBXs
High Voltage 2-Wire/4-Wire, 4-Wire/2-Wire Hybrid
Related Literature
- AN9607, Impedance Matching Design Equations
- AN9628, AC Voltage Gain
- AN9608, Implementing Pulse Metering
- AN549, The HC-5502S/4X Telephone Subscriber
Line Interface Circuits (SLIC)
File Number
3675.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207
|
Copyright
Intersil Corporation 1999