1
HA-5002
110MHz, High Slew Rate, High Output
Current Buffer
The HA-5002 is a monolithic, wideband, high slew rate, high
output current, buffer amplifier.
Utilizing the advantages of the Intersil D.I. technologies, the
HA-5002 current buffer offers 1300V/
μ
s slew rate with
110MHz of bandwidth. The
±
200mA output current capability
is enhanced by a 3
output impedance.
The monolithic HA-5002 will replace the hybrid LH0002 with
corresponding performance increases. These characteristics
range from the 3000k
input impedance to the increased
output voltage swing. Monolithic design technologies have
allowed a more precise buffer to be developed with more than
an order of magnitude smaller gain error.
The HA-5002 will provide many present hybrid users with a
higher degree of reliability and at the same time increase
overall circuit performance.
For the military grade product, refer to the HA-5002/883
datasheet.
Features
Voltage Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.995
High Input Impedance . . . . . . . . . . . . . . . . . . . . . .3000k
Low Output Impedance . . . . . . . . . . . . . . . . . . . . . . . . 3
Very High Slew Rate . . . . . . . . . . . . . . . . . . . . . 1300V/
μ
s
Very Wide Bandwidth. . . . . . . . . . . . . . . . . . . . . . 110MHz
High Output Current
. . . . . . . . . . . . . . . . . . . . . . . . . . ±
200mA
Pulsed Output Current . . . . . . . . . . . . . . . . . . . . . . 400mA
Monolithic Construction
Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
Line Driver
Data Acquistion
110MHz Buffer
Radara Cable Driver
High Power Current Booster
High Power Current Source
Sample and Holds
Video Products
Ordering Information
PART NUMBER
PART MARKING
TEMP.
RANGE (°C)
PACKAGE
PKG.
DWG. #
HA2-5002-2
HA2-5002-2
-55 to 125
8 Pin Metal Can
T8.C
HA2-5002-5
HA2-5002-5
0 to 75
8 Pin Metal Can
T8.C
HA3-5002-5
HA3-5002-5
0 to 75
8 Ld PDIP
E8.3
HA3-5002-5Z (Note)
HA3-5002-5Z
0 to 75
8 Ld PDIP* (Pb-free)
E8.3
HA4P5002-5
HA4P5002-5
0 to 75
20 Ld PLCC
N20.35
HA4P5002-5Z (Note)
HA4P5002-5Z
0 to 75
20 Ld PLCC (Pb-free)
N20.35
HA9P5002-5
50025
0 to 75
8 Ld SOIC
M8.15
HA9P5002-5Z (Note)
50025Z
0 to 75
8 Ld SOIC (Pb-free)
M8.15
HA9P5002-9
50029
-40 to 85
8 Ld SOIC
M8.15
HA9P5002-9Z (Note)
50029Z
-40 to 85
8 Ld SOIC (Pb-free)
M8.15
*Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
March 8, 2006
FN2921.11
Data Sheet
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003-2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.