
Corning Gilbert Broadband Products
Tel: 800 528 5567 / 623 245 1050 Fax: 800 344 6358 / 623 939 3538
53
2.017 [51.2 mm]
Accepts .032 dia. [0.8 mm]
to .040 dia. [1.0 mm]
Center Conductor
3/8-32 THD
.740 dia. [18.8 mm]
Diamond Knurl
Mates with 5/8-24
Female Interface
Part Number
NS-9178-1
“F” Female Test Adapter
“F” Female Test Adapter
Product Application
Features:
Spring loaded (axially) gold plated center
conductor contact
5/8" quick disconnect outer contact design of
bright alloy plated beryllium copper
Designed for rapid insertion and removal
Machined contacts in “F” female interface
Passes AC power & RF signals
This product is designed to allow extraction of test signals and AC
power from a female KS interface. The contact probe is spring loaded
axially to accommodate a wide range of seizure mechanisms and
dimensions. The 5/8" male interface employs a beryllium copper quick
disconnect interface to eliminate threading. This allows quick insertion
or removal. The female "F" connector has machined contacts for
improved RF performance and maximum center conductor contact.
This product passes AC power and can be used for a temporary voltage
test point.
1.73 [44.0 mm]
.34 [8.7 mm]
1/2 [12.7 mm] Hex
.032 Dia. [0.8 mm]
Center Conductor Crimp Ring
Outer Conductor Crimp Ring
7/16" [11.1 mm]
3/8" [9.5 mm]
9/16" [14.3 mm]
Part Number
GAF-360-320-QR
320 QR (MDU 320) Crimp Connector
320 QR (MDU 320) Crimp Connector
Product Application
Features:
Patented Gilbert 360 crimp design
Integral pin
Free spinning sealed nut design (Patent
Pending)
Cadmium plated brass body
Small profile for use in confined areas.
Uses G-CRT-41Q crimp tool (.452" hex crimp)
Uses G-SCT-F320-QR Cable coring tool
"F" male interface meets SCTE-IPS-SP-401
requirements
The patented GAF-360-320-QR is a crimp style male "F" connector that
provides a circular seal to the cable outer conductor and jacket. Before
crimping, this unique patented crimp ring is hex shaped on the outside
with a round bore. After crimping, this bore remains round providing a
360 degree contact to the cable. This connector has a separate external
crimp to seize the pin to the center conductor of the cable. This pro-
vides a highly reliable connection between the integral pin and cable
center conductor. Connector installation requires coring of the cable.
See preparation dimensions below.
For outdoor use, this connector should be used in combination with the
Corning Gilbert Seal Ring (G-SR-1/2). This seal ring has been designed
to work in conjunction with a standard outdoor "F" female port (SCTE-
IPS-SP-400) to insure moisture integrity.