
A213
0.8mm Pitch Stacking Height 5 to 9mm Connector
FX6 Series
I
Features
1. Stacking Height 5 to 9mm
The board to board stacking height can be set at every
millimeter between 5 and 9mm.
2. Effective Contact Length 1.7mm
Despite the low profile type connector, the connector has the
1.7mm long effective contact length and provides a margin
sufficient to contact.
3. Mating Guide
The self-alignment for mating action exhibits a high guide
level at
±
1mm, and makes the mating process easier by
providing the guide rib.
I
Applications
Note PC, business equipments such as handy terminals, and other equipment which require miniaturization or light-weight.
4. Automatic Mounting
The standard packaging specification specifies the stick
package, considering the automatic mount, while the emboss
package can also correspond to the connector with less than
80 contacts. (However, the product is limited to 80 contacts.)
5. SMT Coplanarity
The lead coplanarity on the SMT soldered area is maintained
with the high accuracy of less than 0.1mm.
I
Product Specifications
Rating
Current rating 0.5A
Voltage rating
100V AC
Operating Temperature Range -55
to +85
Note 1.
Storage Temperature Range -10
to +60
Note 2.
Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Item
Specification
Condition
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
5.
Humidity (Steady state)
Contact resistance: 50m
ohms
max.
Insulation resistance: 100m
ohms
min.
Contact resistance: 50m
ohms
max:
Insulation resistance: 100m
ohms
min.
7.
Durability (Mating/un-mating)
Contact resistance: 50m
ohms
max.
8.
Resistance to Soldering
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
heat
100M
ohms
min
No flashover or insulation breakdown.
40m
ohms
max.
No electrical discontinuity of 1μs or more
250V DC
300V AC/1 minute
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40 and humidity of 90% to 95%
6. Temperature Cycle
100 cycles
Manual soldering: 300 for 3 seconds
5~9mm
Stacking Height: 5 to 9mm
Mounting area 50% OFF, compared with the half pitch connector
Half pitch connector
(FX2 series)
FX6 series
(If compared with 60 contacts)
(-55
: 30 minutes 15 to 35
: 2 to 3 minutes
(-
85
: 30 minutes 15 to 35
: 2 to 3minutes)5 cycles