參數資料
型號: EV-ADF4157SD1Z
廠商: Analog Devices Inc
文件頁數: 6/24頁
文件大?。?/td> 0K
描述: BOARD EVAL FOR ADF4157
標準包裝: 1
主要目的: 計時,頻率合成器
嵌入式:
已用 IC / 零件: ADF4157
主要屬性: 單路分?jǐn)?shù)-N PLL
次要屬性: 6GHz
已供物品:
ADF4157
Data Sheet
Rev. D | Page 14 of 24
R DIVIDER REGISTER (R2) MAP
With R2[2:0] set to 010, the on-chip R divider register is
programmed as shown in Figure 19.
CSR Enable
Setting this bit to 1 enables cycle slip reduction. This is a
method for improving lock times. Note that the signal at the PFD
must have a 50% duty cycle for cycle slip reduction to work. In
addition, the charge pump current setting must be set to a
section for more information.
Note also that the cycle slip reduction feature can only be
operated when the phase detector polarity setting is positive
(DB6 in Register 3). It cannot be used if the phase detector
polarity is set to negative.
Charge Pump Current Setting
Bits DB[27:24] set the charge pump current setting. This should
be set to the charge pump current that the loop filter is designed
Prescaler (P/P + 1)
The dual-modulus prescaler (P/P + 1), along with INT, FRAC,
and MOD, determine the overall division ratio from RFINx to
the PFD input.
Operating at CML levels, it takes the clock from the RF input
stage and divides it down for the counters. It is based on
a synchronous 4/5 core. When set to 4/5, the maximum RF
frequency allowed is 3 GHz. Therefore, when operating
the ADF4157 above 3 GHz, the prescaler must be set to 8/9.
The prescaler limits the INT value.
With P = 4/5, NMIN = 23.
With P = 8/9, NMIN = 75.
RDIV2
Setting this bit to 1 inserts a divide-by-2 toggle flip-flop
between the R counter and the PFD. This can be used to
provide a 50% duty cycle signal at the PFD for use with cycle
slip reduction.
Reference Doubler
Setting DB[20] to 0 feeds the REFIN signal directly to the 5-bit
RF R counter, disabling the doubler. Setting this bit to 1 multiplies
the REFIN frequency by a factor of 2 before feeding into the 5-bit
R counter. When the doubler is disabled, the REFIN falling edge
is the active edge at the PFD input to the fractional synthesizer.
When the doubler is enabled, both the rising edge and falling
edge of REFIN become active edges at the PFD input.
The maximum allowed REFIN frequency when the doubler is
enabled is 30 MHz.
5-Bit R Counter
The 5-bit R counter allows the input reference frequency
(REFIN) to be divided down to produce the reference clock to
the phase frequency detector (PFD). Division ratios from
1 to 32 are allowed.
Reserved Bits
All reserved bits should be set to 0 for normal operation.
相關PDF資料
PDF描述
V48C24E150BG2 CONVERTER MOD DC/DC 24V 150W
MCP100T-300I/TT IC SUPERVISOR ACTIVE LOW SOT23-3
GMM10DRTS CONN EDGECARD 20POS DIP .156 SLD
A2MXS-2636M ADM26S/AE26M/X
GSM10DREI CONN EDGECARD 20POS .156 EYELET
相關代理商/技術參數
參數描述
EV-ADF4159EB1Z 制造商:Analog Devices 功能描述:EVALUATION BOARD - Boxed Product (Development Kits) 制造商:Analog Devices 功能描述:EVAL BOARD FOR ADF4159
EV-ADF4159EB2Z 制造商:Analog Devices 功能描述:13GHZFRAC-NPLL+ADF55XXVCO+3VADM - Boxed Product (Development Kits)
EV-ADF4159EB3Z 制造商:Analog Devices 功能描述:EVALUATIONBOARD - Boxed Product (Development Kits) 制造商:Analog Devices 功能描述:EVAL BOARD FOR ADF4159 制造商:Analog Devices 功能描述:Clock & Timer Development Tools ADF4159 EVAL BRD
EV-ADF4360-0EB1Z 功能描述:BOARD EVAL FOR ADF4360-0 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信,線路接口單元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板,電源,線纜,CD 其它名稱:82EBV2081
EV-ADF4360-1EB1Z 功能描述:BOARD EVAL FOR ADF4360-1 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信,線路接口單元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板,電源,線纜,CD 其它名稱:82EBV2081