3
tape anD reel Mechanical oUtline
BETA TRANSFORMER TECHNOLOGY CORP 40 ORVILLE DRIVE BOHEMIA NY 11716-2529 631-244-7393 FAX 631-244-8893
NOTeS:
1) These transformers have been classified as Level 3 rating per IPC-9503, and must be processed accordingly. To ensure product integrity and main-
tain product warranty, the sutomer must comply with the storage and handling conditions as specified in the IPC-9053 for a level 3 device. Transformers
must be re flowed within 168 hours of removal from sealed bag. Reflow process must not cause the peak body temperature of the device to exceed
225°C and must not expose the device to temperatures above 183°C for more than 90 seconds. These parts are provided dry-packed in accordance
with J-STD-033. Tape and Reel packaging is available. Contact factory for further information.
2) By providing surface mount parts that have been dried per IPC-9503 (Moisture Sensitivity Classification for Non-IC components) and Dry-Packed in
accordance with J-STD-033 (Standard for handling, packing, shipping and use of Moisture/Reflow sensitive surface mount devices), Beta has signifi-
cantly reduced the possibility of moisture sensitivity/reflow induced "Pop-corning" or Bulging during customer's reflow soldering process. experiments
performed by Beta and data provided by manufacturers of similar devices indicate that post reflow visual/mechanical anomalies can be reduced by
more than 90%. Since customer reflow profiles and CCA density can vary, Beta recommends that the customer verify solder process compatibility and
yield assessment of these devices.
TAPE AND REEL MECHANICAL OUTLINE
DIMENSIONS ARE IN
INCHES (MM)
TOLERANCES
.XX (.X) = .008 (0.20)
.XXX (.XX) = .004 (0.10)
0.795 .006
(20.20 .15)
0.945
(24.00)
0.74
(18.8)
1.73 .012
(44.0 .30)
0.069
(1.75)
0.98
(24.9)
0.079 .006
(2.00 .15)
0.157
(4.00)
0.059 +.004/-.000
(
1.5 +.1/-.0)
0.079 MIN
(
2.00 MIN)
R 0.02 TYP
(R 0.5 TYP)
0.012 .002
(0.30 .05)
R 0.012 MAX
(R 0.30 MAX)
0.20
(5.2)
1.591
(40.40)
0.008 .002
(0.20 .05)
R 0.030
(R 0.75)
PARTS PACKAGED ON 13” DIAMETER REEL,
450 PARTS PER FULL REEL.
taBle 2. electrical characteristics
Beta p/n
tUrns ratio
priMarY
seconDarY
Dc resistance
(MaX)
oUtpUt rise
tiMe (MaX)
iMpeDance
(Min)
75khZ to 249khZ 250khZ to 1MhZ
(16-13), (12-9)
3,000
DSS-2033
1:3.75 ±3%
1-3 (6-8)
16-13 (12-9)
(6-8), (1-3) 0.35
(16-13), (12-9) 3.0
250 ns
(16-13), (12-9)
4,000
DSS-2005
1:2.50 ±3%
1-3 (6-8)
16-13 (12-9)
(6-8), (1-3) 1.0
(16-13), (12-9) 3.5
250 ns
(16-13), (12-9)
3,000
(16-13), (12-9)
4,000
DSS-2012
1.25:1 ±3%
1-3 (6-8)
16-13 (12-9)
(6-8), (1-3) 3.2
(16-13), (12-9) 3.0
150 ns
(1-3), (6-8)
3,000
(1-3), (6-8)
4,000
DSS-2015
1.41:1 ±3%
1-3 (6-8)
16-13 (12-9)
(6-8), (1-3) 3.5
(16-13), (12-9) 3.0
150 ns
(1-3), (6-8)
5,000
(1-3), (6-8)
7,200
DSS-2233
1:2.70 ±3%
1-3 (6-8)
15-14 (11-10)
(6-8), (1-3) 0.35
(15-14), (11-10) 2.0
250 ns
(15-14), (11-10)
1,500
(15-14), (11-10)
4,000
DSS-2205
1:1.79 ±3%
1-3 (6-8)
15-14 (11-10)
(6-8), (1-3) 1.0
(15-14), (11-10) 2.5
150 ns
(15-14), (11-10)
1,500
(15-14), (11-10)
4,000
DSS-2212
1.66:1 ±3%
1-3 (6-8)
15-14 (11-10)
(6-8), (1-3) 3.2
(15-14), (11-10) 1.5
150 ns
(1-3), (6-8)
3,000
(1-3), (6-8)
4,000
DSS-2215
2.00:1 ±3%
1-3 (6-8)
15-14 (11-10)
(6-8), (1-3) 3.5
(15-14), (11-10) 0.3
150 ns
(1-3), (6-8)
5,000
(1-3), (6-8)
7,200