- 您現在的位置：買賣IC網 > PDF目錄97860 > DS14285SN (MAXIM INTEGRATED PRODUCTS INC) 1 TIMER(S), REAL TIME CLOCK, PDSO24 PDF資料下載
參數資料
| 型號： | DS14285SN |
| 廠商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分類： | Timer or RTC |
| 英文描述： | 1 TIMER(S), REAL TIME CLOCK, PDSO24 |
| 封裝： | 0.300 INCH, SOP-24 |
| 文件頁數： | 25/26頁 |
| 文件大小： | 515K |
| 代理商： | DS14285SN |
DS14285/DS14287
8 of 26
RTC ADDRESS MAP
The address map of the DS14285/DS14287 is shown in Figure 2. The address map consists of 114 bytes
of user RAM, 10 bytes of RAM that contain the RTC time, calendar, and alarm data, and 4 bytes which
are used for control and status. All 128 bytes can be directly written or read except for the following:
1. Registers C and D are read-only.
2. Bit 7 of Register A is read-only.
3. The high order bit of the seconds byte is read-only.
The contents of four registers (A,B,C, and D) are described in the “Registers” section.
Figure 2. DS14285/DS14287 Address Map
TIME, CALENDAR AND ALARM LOCATIONS
The time and calendar information is obtained by reading the appropriate memory bytes. The time,
calendar, and alarm are set or initialized by writing the appropriate RAM bytes. The contents of the 10
time, calendar, and alarm bytes can be either Binary or Binary-Coded Decimal (BCD) format. Before
writing the internal time, calendar, and alarm registers, the SET bit in Register B should be written to a
logic 1 to prevent updates from occurring while access is being attempted. In addition to writing the 10
time, calendar, and alarm registers in a selected format (binary or BCD), the data mode bit (DM) of
Register B must be set to the appropriate logic level. All 10 time, calendar, and alarm bytes must use the
same data mode. The set bit in Register B should be cleared after the data mode bit has been written to
allow the real-time clock to update the time and calendar bytes. Once initialized, the real-time clock
makes all updates in the selected mode. The data mode cannot be changed without reinitializing the 10
data bytes. Table 1 shows the binary and BCD formats of the ten time, calendar, and alarm locations. The
相關PDF資料 |
PDF描述 |
|---|---|
| DS14285Q | 1 TIMER(S), REAL TIME CLOCK, PQCC28 |
| DS14285 | 1 TIMER(S), REAL TIME CLOCK, PDIP24 |
| DS1670S | 0 TIMER(S), REAL TIME CLOCK, PDSO20 |
| DS14287 | 1 TIMER(S), REAL TIME CLOCK, PDIP24 |
| DS1670E | 0 TIMER(S), REAL TIME CLOCK, PDSO20 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS14285SN/T&R | 制造商:Maxim Integrated Products 功能描述:IC RTC W/NV RAM CNTRL IND 24SOIC |
| DS14285SN/T&R | 功能描述:IC RTC W/NV RAM CNTRL IND 24SOIC RoHS:否 類別:集成電路 (IC) >> 時鐘/計時 - 實時時鐘 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:時鐘/日歷 特點:警報器，閏年，SRAM 存儲容量:- 時間格式:HH:MM:SS（12/24 小時） 數據格式:YY-MM-DD-dd 接口:SPI 電源電壓:2 V ~ 5.5 V 電壓 - 電源，電池:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WDFN 裸露焊盤 供應商設備封裝:8-TDFN EP 包裝:管件 |
| DS14285SN/TR | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:Real-Time Clock with NV RAM |
| DS14285SN+ | 功能描述:實時時鐘 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
| DS14285SN+T&R | 制造商:Maxim Integrated Products 功能描述:IC RTC W/NV RAM CNTRL 24-SOIC 制造商:DSC 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。