
AX88772
USB to 10/100 Fast Ethernet/HomePNA Controller
Bit7
Reserved
Bit6
IPPD
Bit5
IPRL
Bit4
BZ
Bit3
PRL
Bit2
PRTE
Bit1
RT
Bit0
RR
1: set high to clear state.
0: set low to exit clear state (default).
RT: Clear frame length error for Bulk Out.
1: set high to enter clear state.
0: set low to exit clear state (default).
PRTE: External Phy Reset pin Tri-state Enable.
1: Enable, i.e., the external PHYRST_N pin is tri-stated (default). This allows the PHYRST_N pin’s active level to
be controlled by external pulled-up (active high during power-on) or pulled-down resistor (active low during
power-on).
0: Disabled, i.e., the external PHYRST_N pin’s level is driven by either PRL bit or internal “USB RESET” based on
the setting in SCPR bit in Flag byte of EEPROM.
PRL: External Phy Reset pin Level. When SCPR bit = 1 and PRTE = 0, this bit controls the output level of external
PHYRST_N pin.
1: Set to high (default).
0: Set to low.
BZ: Force Bulk In to return a Zero-length packet.
1: Software can force Bulk In to return a zero-length USB packet.
0: Normal operation mode (default).
IPRL: Internal Phy Reset control. When SCPR bit = 1, this bit acts as reset signal of internal Ethernet Phy.
1: Internal Ethernet Phy is in operating state.
0: Internal Ethernet Phy in reset state (default).
IPPD: Internal Ethernet Phy Power Down control.
1: Internal Ethernet Phy is in power down mode (default).
0: Internal Ethernet Phy is in operating mode.
6.2.1.24 Software PHY Select Status Register (21h, read only) and Software PHY Select Register
22h, write only)
Bit7
Bit6
Bit5
Bit4
Bit3
Reserved
PSEL: Phy Select, when ASEL = 0 (manually select the Phy to operate)
1: Select embedded 10/100 Ethernet Phy (default).
0: Select external Phy, which is attached to the MII interface
ASEL: Auto Select or Manual Select
1: Automatically select based on link status of embedded 10/100 Ethernet Phy (default).
0: Manually select between the embedded 10/100 Ethernet Phy and the external one.
RR: Clear frame length error for Bulk In.
Bit2
Bit1
ASEL
Bit0
PSEL
ASIX ELECTRONICS CORPORATION
26