參數資料
型號： ADV7180BSTZ-REEL
廠商： Analog Devices Inc
文件頁數： 38/116頁
文件大?。?/td> 0K
描述： IC VIDEO DECODER SDTV 64-LQFP
產品變化通告： ADV7180 Metal Mask Edit 22/Oct/2009
設計資源： Low Cost Differential Video Receiver Using ADA4851 Amplifier and ADV7180 Video Decoder (CN0060)
Low Cost Video Multiplexer for Video Switching Using ADA4853-2 Op Amp with Disable Function (CN0076)
標準包裝： 1
類型： 視頻解碼器
應用： 數碼相機，手機，便攜式視頻
安裝類型： 表面貼裝
封裝/外殼： 64-LQFP
供應商設備封裝： 64-LQFP（10x10）
包裝： 標準包裝
其它名稱： ADV7180BSTZ-REELDKR
ADV7180
Data Sheet
Rev. I | Page 28 of 116
AD_SECAM_EN, Enable Autodetection of SECAM,
Address 0x07[6]
Setting AD_SECAM_EN to 0 (default) disables the autodetection
of SECAM.
Setting AD_SECAM_EN to 1 enables the detection of SECAM.
AD_N443_EN, Enable Autodetection of NTSC 4.43,
Address 0x07[5]
Setting AD_N443_EN to 0 disables the autodetection of NTSC
style systems with a 4.43 MHz color subcarrier.
Setting AD_N443_EN to 1 (default) enables the detection of
NTSC style systems with a 4.43 MHz color subcarrier.
AD_P60_EN, Enable Autodetection of PAL 60,
Address 0x07[4]
Setting AD_P60_EN to 0 disables the autodetection of PAL
systems with a 60 Hz field rate.
Setting AD_P60_EN to 1 (default) enables the detection of PAL
systems with a 60 Hz field rate.
AD_PALN_EN, Enable Autodetection of PAL N,
Address 0x07[3]
Setting AD_PALN_EN to 0 (default) disables the detection of
the PAL N standard.
Setting AD_PALN_EN to 1 enables the detection of the PAL N
standard.
AD_PALM_EN, Enable Autodetection of PAL M,
Address 0x07[2]
Setting AD_PALM_EN to 0 (default) disables the autodetection
of PAL M.
Setting AD_PALM_EN to 1 enables the detection of PAL M.
AD_NTSC_EN, Enable Autodetection of NTSC,
Address 0x07[1]
Setting AD_NTSC_EN to 0 (default) disables the detection of
standard NTSC.
Setting AD_NTSC_EN to 1 enables the detection of standard NTSC.
AD_PAL_EN, Enable Autodetection of PAL B/D/I/G/H,
Address 0x07[0]
Setting AD_PAL_EN to 0 (default) disables the detection of
standard PAL.
Setting AD_PAL_EN to 1 enables the detection of standard PAL.
SFL_INV, Subcarrier Frequency Lock Inversion
This bit controls the behavior of the PAL switch bit in the SFL
(genlock telegram) data stream. It was implemented to solve
some compatibility issues with video encoders. It solves two
problems.
First, the PAL switch bit is only meaningful in PAL. Some
encoders (including Analog Devices encoders) also look at the
state of this bit in NTSC.
Second, there was a design change in Analog Devices encoders
from ADV717x to ADV719x. The older versions used the SFL
(genlock telegram) bit directly, whereas the newer ones invert
the bit prior to using it. The reason for this is that the inversion
compensated for the one line delay of an SFL (genlock telegram)
transmission.
As a result, for the ADV717x and ADV73xx encoders, the PAL
switch bit in the SFL (genlock telegram) must be 0 for NTSC to
work. For the ADV7194 video encoder, the PAL switch bit in the
SFL must be 1 to work in NTSC. If the state of the PAL switch bit
is wrong, a 180° phase shift occurs.
In a decoder/encoder back-to-back system in which SFL is used,
this bit must be set up properly for the specific encoder used.
SFL_INV, Subcarrier Frequency Lock Inversion,
Address 0x41[6]
Setting SFL_INV to 0 (default) makes the part SFL compatible
with the ADV717x and ADV73xx video encoders.
Setting SFL_INV to 1 makes the part SFL compatible with the
ADV7194 video encoder.
Lock Related Controls
Lock information is presented to the user through Bits[1:0] of
the Status 1 register (see the Status 1[7:0], Address 0x10[7:0]
section). Figure 21 outlines the signal flow and the controls
available to influence the way the lock status information is
generated.
1
0
TIME_WIN
FREE_RUN
STATUS 1[0]
SELECT THE RAW LOCK SIGNAL
SRLS
FILTER THE RAW LOCK SIGNAL
CIL[2:0], COL[2:0]
TAKE fSC LOCK INTO ACCOUNT
FSCLE
STATUS 1[1]
fSC LOCK
1
0
COUNTER INTO LOCK
COUNTER OUT OF LOCK
MEMORY
05700-
016
Figure 21. Lock Related Signal Path
相關PDF資料
PDF描述
MAX3485ECSA+ IC TXRX RS485/422 10MBPS 8SOIC
VI-BWP-MX-F3 CONVERTER MOD DC/DC 13.8V 75W
VI-BWP-MX-F2 CONVERTER MOD DC/DC 13.8V 75W
VI-BWP-MW CONVERTER MOD DC/DC 13.8V 100W
VE-2W2-IW-F2 CONVERTER MOD DC/DC 15V 100W
相關代理商/技術參數
參數描述
ADV7180KCP32Z 功能描述:IC VIDEO DECODER 10BIT 32LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 產品變化通告:Product Discontinuation 07/Mar/2011 標準包裝:3,000 系列:OMNITUNE™ 類型:調諧器 應用:移動電話，手機，視頻顯示器 安裝類型:表面貼裝 封裝/外殼:65-WFBGA 供應商設備封裝:PG-WFSGA-65 包裝:帶卷 (TR) 其它名稱:SP000365064
ADV7180KCP32Z-RL 功能描述:IC VIDEO DECODER 10BIT 32LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 產品變化通告:Product Discontinuation 07/Mar/2011 標準包裝:3,000 系列:OMNITUNE™ 類型:調諧器 應用:移動電話，手機，視頻顯示器 安裝類型:表面貼裝 封裝/外殼:65-WFBGA 供應商設備封裝:PG-WFSGA-65 包裝:帶卷 (TR) 其它名稱:SP000365064
ADV7180KST48Z 功能描述:IC VID DECOD SDTV 10BIT 48LQFP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 產品變化通告:Product Discontinuation 07/Mar/2011 標準包裝:3,000 系列:OMNITUNE™ 類型:調諧器 應用:移動電話，手機，視頻顯示器 安裝類型:表面貼裝 封裝/外殼:65-WFBGA 供應商設備封裝:PG-WFSGA-65 包裝:帶卷 (TR) 其它名稱:SP000365064
ADV7180KST48Z-RL 功能描述:視頻 IC 48-Lead Low Profile Quad Flat Package RoHS:否 制造商:Fairchild Semiconductor 工作電源電壓:5 V 電源電流:80 mA 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-28 封裝:Reel
ADV7180WBCP32Z 制造商:Analog Devices 功能描述:IC, 10-BIT 4X OVERSAMPLING SDTV DECODER 制造商:Analog Devices 功能描述:SDTV VIDEO DECODER 32-PIN LFCSP EP TRAY - Trays
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*