<dfn id="gw0gw"><input id="gw0gw"></input></dfn>
  • <var id="gw0gw"><input id="gw0gw"><sup id="gw0gw"></sup></input></var>
  • <big id="gw0gw"><delect id="gw0gw"><fieldset id="gw0gw"></fieldset></delect></big>
    • <dfn id="gw0gw"><pre id="gw0gw"><strong id="gw0gw"></strong></pre></dfn>
      參數資料
      型號: ADUC848BS8-3
      廠商: ANALOG DEVICES INC
      元件分類: 微控制器/微處理器
      英文描述: MicroConverter Multichannel 24-/16-Bit ADCs with Embedded 62 kB Flash and Single-Cycle MCU
      中文描述: 8-BIT, FLASH, 12.58 MHz, MICROCONTROLLER, PQFP52
      封裝: 14 X 14 MM, PLASTIC, MO-112-AC-1, MQFP-52
      文件頁數: 32/108頁
      文件大?。?/td> 1109K
      代理商: ADUC848BS8-3
      ADuC845/ADuC847/ADuC848
      AUXILIARY ADC (ADUC845 ONLY)
      Table 18. ADuC845 Typical Output RMS Noise (μV) vs.
      Update Rate with Chop Enabled
      SF Word
      Data Update Rate (Hz)
      13
      105.03
      23
      59.36
      27
      50.56
      69
      19.79
      255
      5.35
      Rev. A | Page 32 of 108
      μV
      17.46
      3.13
      4.56
      2.66
      1.13
      Table 19. ADuC845 Typical Peak-to-Peak Resolution (Bits) vs.
      Update Rate
      1
      with Chop Enabled
      SF Word
      Data Update Rate (Hz)
      13
      105.03
      23
      59.36
      27
      50.56
      69
      19.79
      255
      5.35
      Bits
      15.5
      18
      17.5
      18
      19.5
      1
      ADC converting in bipolar mode.
      Table 20. ADuC845 Typical Output RMS Noise (μV) vs.
      Update Rate with Chop Disabled
      SF Word
      Data Update Rate (Hz)
      3
      1365.33
      13
      315.08
      66
      62.06
      69
      59.36
      81
      50.57
      255
      16.06
      μV
      1386.58
      34.94
      3.2
      3.19
      3.14
      1.71
      Table 21. ADuC845 Peak-to-Peak Resolution (Bits) vs.
      Update Rate with Chop Disabled
      SF Word
      Data Update Rate (Hz)
      3
      1365.33
      13
      315.08
      66
      62.06
      69
      59.36
      81
      50.57
      255
      16.06
      REFERENCE INPUTS
      The ADuC845/ADuC847/ADuC848 each have two separate
      differential reference inputs, REFIN± and REFIN2±. While both
      references are available for use with the primary ADC, only
      REFIN± is available for the auxiliary ADC (ADuC845 only).
      The common-mode range for these differential references is
      from AGND to AV
      DD
      . The nominal external reference voltage is
      2.5 V, with the primary and auxiliary (ADuC845 only)
      reference
      select bits configured from the ADC0CON2 and ADC1CON
      (ADuC845 only), respectively.
      Bits
      9
      14.5
      18
      18
      18
      19
      When an external reference voltage is used, the primary ADC
      sees this internally as a 2.56 V reference (V
      REF
      × 1.024).
      Therefore, any calculations of LSB size should account for this.
      For instance, with a 2.5 V external reference connected and
      using a gain of 1 on a unipolar range (2.56 V), the LSB size is
      (2.56/2
      24
      ) = 152.6 nV (if using the 24-bit ADC on the ADuC845
      or ADuC847). If a bipolar gain of 4 is used (±640 mV), the LSB
      size is (±640 mV)/2
      24
      ) = 76.3 nV (again using the 24-bit ADC
      on the ADuC845 or ADuC847).
      The ADuC845/ADuC847/ADuC848 can also be configured to
      use the on-chip band gap reference via the XREF0/1 bits in the
      ADC0CON2 SFR (for primary ADC) or the AXREF bit in
      ADC1CON (for auxiliary ADC (ADuC845 only)). In this mode
      of operation, the ADC sees the internal reference of 1.25 V,
      thereby halving all the input ranges. A consequence of using the
      internal band gap reference is a noticeable degradation in peak-
      to-peak resolution. For this reason, operation with an external
      reference is recommended.
      In applications where the excitation (voltage or current) for the
      transducer on the analog input also drives the reference inputs
      for the part, the effect of any low frequency noise in the
      excitation source is removed because the application is ratio-
      metric. If the parts are not used in a ratiometric configuration, a
      low noise reference should be used. Recommended reference
      voltage sources for the ADuC845/ADuC847/ADuC848 include
      ADR421, REF43, and REF192.
      The reference inputs provide a high impedance, dynamic load
      to external connections. Because the impedance of each reference
      input is dynamic, resistor/capacitor combinations on these pins
      can cause dc gain errors, depending on the output impedance of
      the source that is driving the reference inputs. Reference voltage
      sources, such as those mentioned above, for example, the ADR421,
      typically have low output impedances, and, therefore, decoupling
      capacitors on the REFIN± or REFIN2± inputs would be recom-
      mended (typically 0.1 μF). Deriving the reference voltage from
      an external resistor configuration means that the reference input
      sees a significant external source impedance. External decoupling
      of the REFIN± and/or REFIN2± inputs is not recommended in
      this type of configuration.
      BURNOUT CURRENT SOURCES
      The primary ADC on the ADuC845 and the ADC on the
      ADuC847 and ADuC848 incorporate two 200 μA constant
      current generators, one sourcing current from the AV
      DD
      to
      AIN(+), and one sinking current from AIN(
      ) to AGND. These
      currents are only configurable for use on AIN4 to AIN5 and/or
      AIN6 to AIN7 in differential mode only, from the ICON.6 bit in
      the ICON SFR (see Table 30). These burnout current sources are
      also available only with buffering enabled via the BUF0/BUF1 bits
      in the ADC0CON1 SFR. Once the burnout currents are turned
      on, a current flows in the external transducer circuit, and a
      measurement of the input voltage on the analog input channel
      相關PDF資料
      PDF描述
      ADUC848BS8-5 MicroConverter Multichannel 24-/16-Bit ADCs with Embedded 62 kB Flash and Single-Cycle MCU
      ADUC845 MicroConverter Multichannel 24-/16-Bit ADCs with Embedded 62 kB Flash and Single-Cycle MCU
      ADUC845BCP8-3 MicroConverter Multichannel 24-/16-Bit ADCs with Embedded 62 kB Flash and Single-Cycle MCU
      ADUC847BCP8-3 MicroConverter Multichannel 24-/16-Bit ADCs with Embedded 62 kB Flash and Single-Cycle MCU
      ADUC845BCP8-5 MicroConverter Multichannel 24-/16-Bit ADCs with Embedded 62 kB Flash and Single-Cycle MCU
      相關代理商/技術參數
      參數描述
      ADUC848BS8-5 制造商:Analog Devices 功能描述:MCU 8-bit ADuC8xx 8052 CISC 62KB Flash 3.3V/5V 52-Pin MQFP 制造商:Analog Devices 功能描述:IC MICROCONTROLLER
      ADUC848BSZ32-3 功能描述:IC MCU FLASH W/16BIT ADC 52MQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC8xx 標準包裝:38 系列:Encore!® XP® 核心處理器:eZ8 芯體尺寸:8-位 速度:5MHz 連通性:IrDA,UART/USART 外圍設備:欠壓檢測/復位,LED,POR,PWM,WDT 輸入/輸出數:16 程序存儲器容量:4KB(4K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 3.6 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:20-SOIC(0.295",7.50mm 寬) 包裝:管件 其它名稱:269-4116Z8F0413SH005EG-ND
      ADUC848BSZ32-5 功能描述:IC MCU FLASH W/16BIT ADC 52MQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC8xx 標準包裝:38 系列:Encore!® XP® 核心處理器:eZ8 芯體尺寸:8-位 速度:5MHz 連通性:IrDA,UART/USART 外圍設備:欠壓檢測/復位,LED,POR,PWM,WDT 輸入/輸出數:16 程序存儲器容量:4KB(4K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 3.6 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:20-SOIC(0.295",7.50mm 寬) 包裝:管件 其它名稱:269-4116Z8F0413SH005EG-ND
      ADUC848BSZ62-3 功能描述:IC MCU FLASH W/16BIT ADC 52MQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC8xx 標準包裝:38 系列:Encore!® XP® 核心處理器:eZ8 芯體尺寸:8-位 速度:5MHz 連通性:IrDA,UART/USART 外圍設備:欠壓檢測/復位,LED,POR,PWM,WDT 輸入/輸出數:16 程序存儲器容量:4KB(4K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 3.6 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:20-SOIC(0.295",7.50mm 寬) 包裝:管件 其它名稱:269-4116Z8F0413SH005EG-ND
      ADUC848BSZ62-5 功能描述:IC FLASH MCU W/16BIT ADC 52MQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC8xx 標準包裝:250 系列:LPC11Uxx 核心處理器:ARM? Cortex?-M0 芯體尺寸:32-位 速度:50MHz 連通性:I²C,Microwire,SPI,SSI,SSP,UART/USART,USB 外圍設備:欠壓檢測/復位,POR,WDT 輸入/輸出數:40 程序存儲器容量:96KB(96K x 8) 程序存儲器類型:閃存 EEPROM 大小:4K x 8 RAM 容量:10K x 8 電壓 - 電源 (Vcc/Vdd):1.8 V ~ 3.6 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:48-LQFP 包裝:托盤 其它名稱:568-9587