- 您現在的位置：買賣IC網 > PDF目錄375264 > ADS7804UB 12-Bit 10ms Sampling CMOS ANALOG-to-DIGITAL CONVERTER PDF資料下載
參數資料
| 型號： | ADS7804UB |
| 英文描述： | 12-Bit 10ms Sampling CMOS ANALOG-to-DIGITAL CONVERTER |
| 中文描述： | 12位10ms的采樣CMOS模擬數字轉換器 |
| 文件頁數： | 9/10頁 |
| 文件大?。?/td> | 182K |
| 代理商： | ADS7804UB |
ADS7804
9
FIGURE 7. Full Scale Transfer Function.
REFERENCE
The ADS7804 can operate with its internal 2.5V reference or
an external reference. By applying an external reference to
pin 5, the internal reference can be bypassed. The reference
voltage at REF is buffered internally with the output on CAP
(pin 4).
The internal reference has an 8 ppm/
°
C drift (typical) and
accounts for approximately 20% of the full scale error
(FSE =
±
0.5% for low grade,
±
0.25% for high grade).
REF
REF (pin 3) is an input for an external reference or the output
for the internal 2.5V reference. A 2.2
μ
F capacitor should be
connected as close to the REF pin as possible. The capacitor
and the output resistance of REF create a low pass filter to
bandlimit noise on the reference. Using a smaller value
capacitor will introduce more noise to the reference degrad-
ing the SNR and SINAD. The REF pin should not be used
to drive external AC or DC loads.
The range for the external reference is 2.3V to 2.7V and
determines the actual LSB size. Increasing the reference
voltage will increase the full scale range and the LSB size of
the converter which can improve the SNR.
CAP
CAP (pin 4) is the output of the internal reference buffer. A
2.2
μ
F capacitor should be placed as close to the CAP pin as
possible to provide optimum switching currents for the
CDAC throughout the conversion cycle and compensation
for the output of the internal buffer. Using a capacitor any
smaller than 1
μ
F can cause the output buffer to oscillate and
may not have sufficient charge for the CDAC. Capacitor
values larger than 2.2
μ
F will have little affect on improving
performance.
The output of the buffer is capable of driving up to 2mA of
current to a DC load. DC loads requiring more than 2mA of
current from the CAP pin will begin to degrade the linearity
of the ADS7804. Using an external buffer will allow the
internal reference to be used for larger DC loads and AC
loads. Do not attempt to directly drive an AC load with the
output voltage on CAP. This will cause performance degra-
dation of the converter.
–9.99983V –9.9998V
–10V
Digital
Output
7FF
Analog
Input
800
9.999815V
+10V
Ideal Transfer Function
With External Resistors
Range of Transfer Function
Without External Resistors
9.9997V
–50mV
–15mV
相關PDF資料 |
PDF描述 |
|---|---|
| ADS7805 | 16-bit 10us sampling CMOS ANALOG-to-DIGITAL CONVERTER |
| ADS7805P | 16-Bit 10ms Sampling CMOS ANALOG-to-DIGITAL CONVERTER |
| ADS7805PB | 16-Bit 10ms Sampling CMOS ANALOG-to-DIGITAL CONVERTER |
| ADS7805U | CMOS Quad 2-Input NOR Gate 14-PDIP -55 to 125 |
| ADS7805UB | 16-Bit 10ms Sampling CMOS ANALOG-to-DIGITAL CONVERTER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADS7804UB/1K | 功能描述:模數轉換器 - ADC 12-Bit 10us Sampling CMOS RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32 |
| ADS7804UB/1KE4 | 功能描述:模數轉換器 - ADC 12-Bit 10us Sampling CMOS RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32 |
| ADS7804UBE4 | 功能描述:模數轉換器 - ADC 12-Bit 10us Sampling CMOS RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32 |
| ADS7804UE4 | 功能描述:模數轉換器 - ADC 12-Bit 10us Sampling CMOS RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32 |
| ADS7804UG4 | 功能描述:模數轉換器 - ADC 12-Bit 10us Sampling CMOS RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32 |
發布緊急采購，3分鐘左右您將得到回復。