}Both Latches Latched X" />
參數資料
型號: AD7840JNZ
廠商: Analog Devices Inc
文件頁數: 14/16頁
文件大小: 0K
描述: IC DAC 14BIT LC2MOS LP 24-DIP
產品培訓模塊: Data Converter Fundamentals
DAC Architectures
標準包裝: 15
設置時間: 2.5µs
位數: 14
數據接口: 串行,并聯(lián)
轉換器數目: 1
電壓電源: 雙 ±
功率耗散(最大): 100mW
工作溫度: 0°C ~ 70°C
安裝類型: 通孔
封裝/外殼: 24-DIP(0.300",7.62mm)
供應商設備封裝: 24-PDIP
包裝: 管件
輸出數目和類型: 1 電壓,雙極
采樣率(每秒): 400k
產品目錄頁面: 785 (CN2011-ZH PDF)
AD7840
REV. B
–7–
Table III. Parallel Mode Truth Table
CS
WR
LDAC
Function
HX
H
}Both Latches Latched
XH
H
L
H
Input Latch Transparent
HH
L
}
Input Latch Latched
H
X
L
DAC Latch Transparent
X
H
L
Analog Output Updated
ff
L
Input Latch Transparent
DAC Latch Data Transfer Inhibited
L
g
L
}Input Latch Is Latched
g
L
DAC Latch Data Transfer Occurs
X = Don’t Care
Figure 6. Parallel Mode Timing Diagram
Figure 7. AD7840 Simplified Parallel Input Control Logic
Serial Data Format
The serial data format is selected for the AD7840 by connecting
the CS/SERIAL line to –5 V. In this case, the WR/SYNC,
D13/SDATA, D12/SCLK, D11/FORMAT and D10/JUSTIFY
pins all assume their serial functions. The unused parallel inputs
should not be left unconnected to avoid noise pickup. Serial
data is loaded to the input latch under control of SCLK, SYNC
and SDATA. The AD7840 expects a 16-bit stream of serial data
on its SDATA input. Serial data must be valid on the falling
edge of SCLK. The SYNC input provides the frame synchroni-
zation signal which tells the AD7840 that valid serial data will
be available for the next 16 falling edges of SCLK. Figure 8
shows the timing diagram for serial data format.
Figure 8. Serial Mode Timing Diagram
Although 16 bits of data are clocked into the AD7840, only 14
bits go into the input latch. Therefore, two bits in the stream are
don’t cares since their value does not affect the input latch data.
The order and position in which the AD7840 accepts the 14 bits
of input data depends upon the FORMAT and JUSTIFY in-
puts. There are four different input data modes which can be
chosen (see Table I in the Pin Function Description section).
The first mode (M1) assumes that the first two bits of the input
data stream are don’t cares, the third bit is the LSB and the last
(or 16th bit) is the MSB. This mode is chosen by tying both the
FORMAT and JUSTIFY pins to a logic 0. The second mode
(M2; FORMAT = 0, JUSTIFY = 1) assumes that the first bit in
the data stream is the LSB, the fourteenth bit is the MSB and
the last two bits are don’t cares. The third mode (M3;
FORMAT= 1, JUSTIFY 0) assumes that the first two bits in
the stream are again don’t cares, the third bit is now the MSB
and the sixteenth bit is the LSB. The final mode (M4; FOR-
MAT = 1, JUSTIFY= 1) assumes that the first bit is the MSB,
the fourteenth bit is the LSB and the last two bits of the stream
are don’t cares.
相關PDF資料
PDF描述
AD9765ASTZ IC DAC 12BIT DUAL 125MSPS 48LQFP
MS3120F16-8S CONN RCPT 8POS WALL MNT W/SCKT
VI-J4B-MZ-F1 CONVERTER MOD DC/DC 95V 25W
VI-24Z-MU-F1 CONVERTER MOD DC/DC 2V 80W
MS27468T25F19PC CONN RCPT 19POS JAM NUT W/PINS
相關代理商/技術參數
參數描述
AD7840JNZ 制造商:Analog Devices 功能描述:IC 14-BIT DAC
AD7840JP 功能描述:IC DAC 14BIT LC2MOS VOUT 28PLCC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯(lián) 轉換器數目:1 電壓電源:雙 ± 功率耗散(最大):100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC(J 形引線) 供應商設備封裝:28-PLCC(11.51x11.51) 包裝:帶卷 (TR) 輸出數目和類型:1 電壓,單極;1 電壓,雙極 采樣率(每秒):143k
AD7840JP-REEL 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述:
AD7840JPZ 功能描述:IC DAC 14BIT LC2MOS VOUT 28PLCC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行,SPI? 轉換器數目:1 電壓電源:單電源 功率耗散(最大):- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC(0.154",3.90mm 寬) 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓,單極;1 電壓,雙極 采樣率(每秒):* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND
AD7840JPZ-REEL 功能描述:IC DAC 14BIT LC2MOS 28PLCC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯(lián) 轉換器數目:1 電壓電源:雙 ± 功率耗散(最大):100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC(J 形引線) 供應商設備封裝:28-PLCC(11.51x11.51) 包裝:帶卷 (TR) 輸出數目和類型:1 電壓,單極;1 電壓,雙極 采樣率(每秒):143k