參數資料
型號: AD7193BCPZ-RL
廠商: Analog Devices Inc
文件頁數: 25/57頁
文件大?。?/td> 0K
描述: IC ADC 24BIT SPI 4.8KHZ 32LFCSP
標準包裝: 5,000
位數: 24
采樣率(每秒): 4.8k
數據接口: DSP,MICROWIRE?,QSPI?,串行,SPI?
轉換器數目: 1
電壓電源: 模擬和數字
工作溫度: -40°C ~ 105°C
安裝類型: 表面貼裝
封裝/外殼: 32-WFQFN 裸露焊盤,CSP
供應商設備封裝: 32-LFCSP-WQ(5x5)
包裝: 帶卷 (TR)
輸入數目和類型: 4 個差分,單極;4 個差分,雙極;8 個偽差分,單極;8 個偽差分,雙極
AD7193
Data Sheet
Rev. D | Page 30 of 56
OFFSET REGISTER
RS2, RS1, RS0 = 110; Power-On/Reset = 0x800000)
The offset register holds the offset calibration coefficient for the
ADC. The power-on reset value of the offset register is 0x800000.
The AD7193 has five offset registers. In differential mode, each
channel has a dedicated offset register. In pseudo differential
mode, Channel AIN1, Channel AIN2, Channel AIN3, and
Channel AIN4 have dedicated registers whereas the remaining
channels share an offset register (see Table 23 and Table 24).
Each of these registers is a 24-bit read/write register. This register
is used in conjunction with its associated full-scale register to
form a register pair. The power-on reset value is automatically
overwritten if an internal or system zero-scale calibration is
initiated by the user. The AD7193 must be placed in power-
down mode or idle mode when writing to the offset register.
FULL-SCALE REGISTER
RS2, RS1, RS0 = 111; Power-On/Reset = 0x5XXXX0
The full-scale register is a 24-bit register that holds the full-scale
calibration coefficient for the ADC. The AD7193 has five full-
scale registers. In differential mode, each channel has a dedicated
full-scale register. In pseudo differential mode, the AIN1, AIN2,
AIN3, and AIN4 channels have dedicated registers whereas the
remaining channels share a full-scale register (see Table 23 and
The full-scale registers are read/write registers. However, when
writing to the full-scale registers, the ADC must be placed in
power-down mode or idle mode. These registers are configured
at power-on with factory calibrated full-scale calibration coeffi-
cients, the calibration being performed at gain = 1. Therefore,
every device has different default coefficients. The default value
is automatically overwritten if an internal or system full-scale
calibration is initiated by the user or if the full-scale register is
written to.
相關PDF資料
PDF描述
AD7898AR-3REEL7 IC ADC 12BIT SRL HS 5V 8-SOIC
VI-2TW-MX-S CONVERTER MOD DC/DC 5.5V 75W
AD7887AR IC ADC 12BIT 2CH SRL 8-SOIC
VI-BNZ-MX CONVERTER MOD DC/DC 2V 30W
MS27467T11F5PA CONN PLUG 5POS STRAIGHT W/PINS
相關代理商/技術參數
參數描述
AD7193BCPZ-RL7 功能描述:IC ADC 24BIT SPI 4.8KHZ 32LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極
AD7193BRUZ 功能描述:IC ADC 24BIT SPI 4.8K 28-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
AD7193BRUZ 制造商:Analog Devices 功能描述:IC ADC 24BIT 4.8KHZ TSSOP-28
AD7193BRUZ-REEL 功能描述:IC ADC 24BIT SPI 4.8KHZ 28TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極
AD7194 制造商:AD 制造商全稱:Analog Devices 功能描述:8-Channel, 4.8 kHz, Ultralow Noise, 24-Bit Sigma-Delta ADC with PGA