參數資料
型號： AD5235BRUZ25
廠商： Analog Devices Inc
文件頁數： 13/32頁
文件大?。?/td> 0K
描述： IC DGTL POT DUAL 1024POS 16TSSOP
產品變化通告： Metal Edit Change 03/Feb/2012
標準包裝： 96
接片： 1024
電阻（歐姆）： 25k
電路數： 2
溫度系數： 標準值 35 ppm/°C
存儲器類型： 非易失
接口： 4 線 SPI（芯片選擇）
電源電壓： 3 V ~ 5.5 V，±2.25 V ~ 2.75 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 16-TSSOP（0.173"，4.40mm 寬）
供應商設備封裝： 16-TSSOP
包裝： 管件
產品目錄頁面： 787 (CN2011-ZH PDF)
AD5235
Data Sheet
Rev. F | Page 20 of 32
ADVANCED CONTROL MODES
The AD5235 digital potentiometer includes a set of user
programming features to address the wide number of
applications for these universal adjustment devices.
Key programming features include the following:
Scratchpad programming to any desirable values
Nonvolatile memory storage of the scratchpad RDAC
register value in the EEMEM register
Increment and decrement instructions for the RDAC
wiper register
Left and right bit shift of the RDAC wiper register to
achieve ±6 dB level changes
26 extra bytes of user-addressable nonvolatile memory
Linear Increment and Decrement Instructions
The increment and decrement instructions (Instruction 14,
Instruction 15, Instruction 6, and Instruction 7) are useful for
linear step adjustment applications. These commands simplify
microcontroller software coding by allowing the controller to
send just an increment or decrement command to the device.
The adjustment can be individual or in a ganged potentiometer
arrangement where both wiper positions are changed at the
same time.
For an increment command, executing Instruction 14
automatically moves the wiper to the next resistance segment
position. The master increment command, Instruction 15,
moves all resistor wipers up by one position.
Logarithmic Taper Mode Adjustment
Four programming instructions produce logarithmic taper
increment and decrement of the wiper position control by
an individual potentiometer or by a ganged potentiometer
arrangement where both wiper positions are changed at the
same time. The 6 dB increment is activated by Instruction 12
and Instruction 13, and the 6 dB decrement is activated by
Instruction 4 and Instruction 5. For example, starting with the
wiper connected to Terminal B, executing 11 increment
instructions (Command Instruction 12) moves the wiper in 6 dB
steps from 0% of the RAB (Terminal B) position to 100% of the RAB
position of the AD5235 10-bit potentiometer. When the wiper
position is near the maximum setting, the last 6 dB increment
instruction causes the wiper to go to the full-scale 1023 code
position. Further 6 dB per increment instructions do not
change the wiper position beyond its full scale (see Table 8).
The 6 dB step increments and 6 dB step decrements are achieved
by shifting the bit internally to the left or right, respectively. The
following information explains the nonideal ±6 dB step adjustment
under certain conditions. Table 8 illustrates the operation of the
shifting function on the RDAC register data bits. Each table row
represents a successive shift operation. Note that the left-shift
12 and 13 instructions were modified such that, if the data in
the RDAC register is equal to zero and the data is shifted left,
the RDAC register is then set to Code 1. Similarly, if the data in
the RDAC register is greater than or equal to midscale and the data
is shifted left, then the data in the RDAC register is automatically
set to full scale. This makes the left-shift function as ideal a
logarithmic adjustment as possible.
The Right-Shift 4 instruction and Right-Shift 5 instruction are
ideal only if the LSB is 0 (ideal logarithmic = no error). If the
LSB is 1, the right-shift function generates a linear half-LSB
error, which translates to a number-of-bits dependent logarithmic
error, as shown in Figure 44. Figure 44 shows the error of the odd
numbers of bits for the AD5235.
Table 8. Detail Left-Shift and Right-Shift Functions for 6 dB
Step Increment and Decrement
Left-Shift (+6 dB/Step)
Right-Shift(–6 dB/Step)
00 0000 0000
11 1111 1111
00 0000 0001
01 1111 1111
00 0000 0010
00 1111 1111
00 0000 0100
00 0111 1111
00 0000 1000
00 0011 1111
00 0001 0000
00 0001 1111
00 0010 0000
00 0000 1111
00 0100 0000
00 0000 0111
00 1000 0000
00 0000 0011
01 0000 0000
00 0000 0001
10 0000 0000
00 0000 0000
11 1111 1111
00 0000 0000
11 1111 1111
00 0000 0000
Actual conformance to a logarithmic curve between the data
contents in the RDAC register and the wiper position for each
Right-Shift 4 command and Right-Shift 5 command execution
contains an error only for odd numbers of bits. Even numbers of
bits are ideal. Figure 44 shows plots of log error [20 × log10
(error/code)] for the AD5235. For example, Code 3 log error = 20 ×
log10 (0.5/3) = 15.56 dB, which is the worst case. The log error plot
is more significant at the lower codes (see Figure 44).
CODE (From 1 to 1023 by 2.0 × 103)
0
G
AI
N
(
d
B)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
02816-
043
0
–40
–20
–60
–80
Figure 44. Log Error Conformance for Odd Numbers of Bits Only
(Even Numbers of Bits Are Ideal)
相關PDF資料
PDF描述
AD8403ARUZ100 IC POT DGTL QUAD 100K 24-TSSOP
AD8403ARUZ50 IC POT DIG QUAD 50K 8BIT 24TSSOP
VI-BN4-IU-F3 CONVERTER MOD DC/DC 48V 200W
VE-23Z-MY-F4 CONVERTER MOD DC/DC 2V 20W
VI-BN3-IU-F1 CONVERTER MOD DC/DC 24V 200W
相關代理商/技術參數
參數描述
AD5235BRUZ25 制造商:Analog Devices 功能描述:Digital Potentiometer IC Package/Case:16
AD5235BRUZ250 功能描述:IC DGTL POT DUAL 1024POS 16TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 35 ppm/°C 存儲器類型:非易失 接口:3 線串口 電源電壓:2.7 V ~ 5.25 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WDFN 裸露焊盤 供應商設備封裝:8-TDFN-EP（3x3） 包裝:剪切帶 (CT) 產品目錄頁面:1399 (CN2011-ZH PDF) 其它名稱:MAX5423ETA+TCT
AD5235BRUZ250-R7 功能描述:IC DGTL POT DUAL 1024POS 16TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,000 系列:DPP 接片:32 電阻（歐姆）:10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN（2x3） 包裝:帶卷 (TR)
AD5235BRUZ25-EP-R7 功能描述:IC DGTL POT 1024POS DUAL 16TSSOP 制造商:analog devices inc. 系列:* 零件狀態:在售 標準包裝:1,000
AD5235BRUZ25-RL7 功能描述:IC DGTL POT DUAL 1024POS 16TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:3,000 系列:DPP 接片:32 電阻（歐姆）:10k 電路數:1 溫度系數:標準值 300 ppm/°C 存儲器類型:非易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.5 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WFDFN 裸露焊盤 供應商設備封裝:8-TDFN（2x3） 包裝:帶卷 (TR)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*