- 您現在的位置：買賣IC網 > PDF目錄375166 > AAT3190ITP-1-T1 (Advanced Analogic Technologies, Inc.) Positive/Negative Charge Pump for Voltage Bias PDF資料下載
參數資料
| 型號： | AAT3190ITP-1-T1 |
| 廠商： | Advanced Analogic Technologies, Inc. |
| 英文描述： | Positive/Negative Charge Pump for Voltage Bias |
| 中文描述： | 正/負電荷泵電壓偏置 |
| 文件頁數： | 12/16頁 |
| 文件大小： | 411K |
| 代理商： | AAT3190ITP-1-T1 |
AAT3190
Positive/Negative Charge Pump for Voltage Bias
12
3190.2005.03.1.0
The voltage rating for the nth flying capacitor in the
negative stage (see Table 2) is:
Table 2: Negative Output Capacitor Voltages.
Single Output Operation
If only one of the two channels is needed, it is pos-
sible to disable either output. Connect the respec-
tive FB pin to V
IN
to disable the output (e.g., con-
nect FBN to V
IN
in order to disable the negative
output).
Input Capacitors
Input Capacitor
The primary function of the input capacitor is to pro-
vide a low impedance loop for the edges of pulsed
current drawn by the IC. Alow ESL X7R or X5R type
ceramic capacitor is ideal for this function. The size
required will vary depending on the load, output volt-
age, and input voltage characteristics. Typically, the
input capacitor should be 5 to 10 times the flying
capacitor. If the source impedance of the input sup-
ply is high, a larger capacitor may be required. To
minimize stray inductance, the capacitor should be
placed as closely as possible to the IC. This keeps
the high frequency content of the input current local-
ized, minimizing radiated and conducted EMI.
Rectifier Diodes
For the rectifiers, use Schottky diodes with a volt-
age rating of 1.5 times the input voltage. The max-
imum steady-state voltage seen by the rectifier
diodes for both the positive and negative charge
pumps (regardless of the number of stages) is:
The BAT54S dual Schottky is offered in a SOT23
package that provides a convenient pin-out for the
voltage doubler configuration. The BAT54SDW
quad Schottky in a SOT363 (2x2mm) package is a
good choice for multiple-stage charge pump config-
uration (see Figure 3, Evaluation Board Schematic).
PC Board Layout
The input and reference capacitor should be placed
as close to the IC as possible. Place the program-
ming resistors (R1-R4) close to the IC, minimizing
trace length to FBN and FBP. Figures 4 and 5 display
the evaluation board layout with the TSOPJW-12
package.
V
REVERSE
= V
IN
- V
F
V
IN
= 5.0V, V
FWD
= 0.3V
Stages (n)
1
2
3
4
5
6
V
BULK(n)
-4.4V
-8.8V
-13.2V
-17.6V
-22.0V
-26.4V
V
FLY(n)
4.7V
9.1V
13.5V
17.9V
22.3V
26.7V
V
FLY(n)
= V
FWD
- V
BULK(n)
相關PDF資料 |
PDF描述 |
|---|---|
| AAT3190ITP-T1 | Positive/Negative Charge Pump for Voltage Bias |
| AAT3192IJQ-1 | Low-Cost, 2-/3-Channel Charge-Pump LED Drivers |
| AAT3192 | Low-Cost, 2-/3-Channel Charge-Pump LED Drivers |
| AAT3193IJQ-1 | Low-Cost, 2-/3-Channel Charge-Pump LED Drivers |
| AAT3193IJQ-2 | Low-Cost, 2-/3-Channel Charge-Pump LED Drivers |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AAT3190ITP-T1 | 制造商:Skyworks Solutions Inc 功能描述:ADJ POS/NEG CHPUMP, 12TSOPJW TR 制造商:Skyworks Solutions Inc 功能描述:IC REG MULTI CONFIG ADJ 12TSOPJW 制造商:Skyworks Solutions Inc 功能描述:LED DRIVER IC |
| AAT3191IJQ-T1 | 制造商:SKYWORKS SOLUTIONS INC 功能描述:DESCRIPTION: CHPMP WLED DRIVERS TR |
| AAT3192 | 制造商:ANALOGICTECH 制造商全稱:Advanced Analogic Technologies 功能描述:2-Channel Charge-Pump LED Driver |
| AAT3192_08 | 制造商:ANALOGICTECH 制造商全稱:Advanced Analogic Technologies 功能描述:2-Channel Charge-Pump LED Driver |
| AAT3192IJQ-1 | 制造商:ANALOGICTECH 制造商全稱:Advanced Analogic Technologies 功能描述:2-Channel Charge-Pump LED Driver |
發布緊急采購，3分鐘左右您將得到回復。