3M No Polish SC Connector
Singlemode and Multimode SC
3M No Polish Connector (NPC) enables fast, on-site
installation of 250 m and 900 m connections utilizing a
one piece, pre-assembled design.
The SC compatible connector consists of a factory-polished
ceramic ferrule, fiber stub and a mechanical splice that is
installed with a simple field tool. A bell-shaped boot is
attached to the connector body, minimizing the chance of
losing or forgetting to install the boot during the connection.
The no polish connector is tested for Premises and FTTP
applications for indoor and outdoor locations and is
available in SM, 62.5 m, 50 m and also 50 m LOMMF
(laser optimized multimode fiber) for 10 Gb applications.
The No Polish Connector is RoHS Compliant.
Features
Benefits
Field installation
Always right cable length with no cable slack to store
One piece, pre-assembled design
No small, loose parts
Simple assembly tool
Fast, easy installation
900m buffer strain relief
Excellent pull out strength
Fiber holder for assembly
Designed to eliminate the need to touch bare fiber
Factory-polished fiber stub in ferrule
No on-site polish or adhesives required
Bell-shaped boot
Helps prevent fiber from bending below minimum bend radius
3
Cross-sectional view of actuated splice: After the fiber
is inserted, the assembly tool depresses the cap to force
clamping and locating surfaces against the fiber, locking
and aligning the fiber in place.
Cap
Fiber
Splice Element
3M No Polish Connector Assembly Tool