DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Website: Desco.com TB-3031 Page 7 of 7
2013 DESCO INDUSTRIES, INC.
Employee Owned
Specifications
The comparative efficiency of overhead ionizers is
determined by a standard test published by the ESD
Association: ANSI/ESD STM 3.1. Typical positive and
negative discharge times (1000V - 100V) measured using
this standard are shown in the “Neutralization (Discharge)
Times” section. The performance of the ionizer was
measured with the unit positioned as shown, with the fan
speed on high and without a filter.
Air Flow
60473 - Three speed fan (150 cfm - 300 cfm)
60640 - Three speed fan (100 cfm - 200 cfm)
Balance (offset voltage)
±10 Volts Typical
±20 Volts Maximum
(Temperature Range: 65°F - 80°F, RH: 15% - 65%)
Chassis
Powder coated steel
Dimensions
60473 - 3.9" H x 6.6" W x 37.3" L
(9.9cm H x 16.8cm W x 94.7 cm L)
60640 - 3.9" H x 6.6" W x 22.3" L
(9.9cm H x 16.8cm W x 56.6 cm L)
Emitter Points
.050" diameter
Made of pure tungsten for improved mechanical strength and
ionization stability.
Fuse
400mA slow blow
High Voltage Power Supply
5.5kV DC nominal
Input Power
AC line power
Internally selectable for 100/120 VAC - 50/60Hz or
220/230 VAC - 50/60Hz
Ion Emission
Steady-state DC with sense feedback
Mounting
May be rigid-mounted or suspended from ceiling
Ozone
< 0.05 ppm
Weight
Limited Warranty
Desco expressly warrants that for a period of one (1) year from the date
of purchase Desco Overhead Ionizers will be free of defects in material
(parts) and workmanship (labor). Within the warranty period, a credit
for purchase of replacement Desco Overhead Ionizer, or, at Desco’s
option, the Overhead Ionizer will be repaired or replaced free of charge.
If product credit is issued, the amount will be calculated by multiplying
the unused portion of the expected one year life times the original unit
purchase price. Call our Customer Service Department at 909-627-8178
(Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material
Authorization (RMA) and proper shipping instructions and address. Please
include a copy of your original packing slip, invoice, or other proof of date
of purchase. Any unit under warranty should be shipped prepaid to the
Desco factory. Warranty replacements will take approximately two weeks.
If your unit is out of warranty, call our Customer Service Department at
909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return
Material Authorization (RMA) and proper shipping instructions and
address. Desco will quote repair charges necessary to bring your unit up
to factory standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF
ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. The express
warranty will not apply to defects or damage due to accidents, neglect,
misuse, alterations, operator error, or failure to properly maintain, clean or
repair products.
Limit of Liability
In no event will Desco or any seller be responsible or liable for any injury,
loss or damage, direct or consequential, arising out of the use of or
the inability to use the product. Before using, users shall determine the
suitability of the product for their intended use, and users assume all risk
and liability whatsoever in connection therewith.