- 您現在的位置：買賣IC網 > PDF目錄63406 > 5TF-95/190-5S 5 SECTIONS - 5 SECTIONS, 95 MHz - 190 MHz, TUNABLE BPF PDF資料下載
參數資料
| 型號： | 5TF-95/190-5S |
| 英文描述： | 5 SECTIONS - 5 SECTIONS, 95 MHz - 190 MHz, TUNABLE BPF |
| 文件頁數： | 4/4頁 |
| 文件大小： | 114K |
| 代理商： | 5TF-95/190-5S |
1725 N. Salisbury Blvd. PO Box 2828 Salisbury, MD 21802
P: 800-780-2169, 410-860-5100 F: 410-860-1949 www.lorch.com lorchsales@lorch.com
37
Tunable Filters — Digital
24 MHz to 3000 MHz
Octave Tuning
High Position Resolution
Built in Backlash Compensation
Simple Command Structure
Lorch’s Standard Digitally Controlled Bandpass Filters are
available with 3 or 5 sections in the frequency range of 25
MHz to 3000 MHz. The typical insertion loss at center
frequency ranges from 0.7 dB to 1.0 dB and standard tuners
have a 3 dB passband bandwidth of 5%. Digitally
Controlled Bandreject Filters are also available. Standard
Bandreject Filters have 3 or 5 sections with a center
frequency between 25 MHz to 220 MHz and a notch depth
of 50 dB to 75 dB. The rejection bandwidth is typically 1%.
All Standard Digitally Controlled Filters have a dial
accuracy of better than 0.5%. The filter is controlled by
sending commands as ASCII strings to the RS232 port.
Communications:
The controller communicates via a RS232-C port with the following settings:
9600 BAUD, 8 Bits/Byte, No parity, 1 stop bit. If a PC us used to send commands to the controller, a standard serial
cable must be connected to the RS232 port of the filter.
Power Supply:
The digitally controlled filter is supplied with a 24 VDC, 0.625 mA, universal power supply. Typically a filter draws
about 250 mA of current.
Lifetime Expectancy & Servicing:
Lorch’s Digitally Controlled Filters do not require servicing. The meantime to failure is calculated at approximately
1,000,000 tune commands (based on 1 tune command every 30 seconds over 1 year) and is mainly determined by the
limited number of write cycles to EEPROM to keep track of the current frequency setting.
相關PDF資料 |
PDF描述 |
|---|---|
| 5PNR-T1014Z | UNSHIELDED, VARIABLE INDUCTOR |
| 5PNR-T1009Z | UNSHIELDED, VARIABLE INDUCTOR |
| 5PNR-T1008Z | UNSHIELDED, VARIABLE INDUCTOR |
| 5PNR-T1007Z | UNSHIELDED, VARIABLE INDUCTOR |
| 5PNR-T1016Z | UNSHIELDED, VARIABLE INDUCTOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 5TG1138 | 制造商:Siemens 功能描述:DELTA sheet of PICTOG. labeling insert |
| 5TG2480 | 制造商:Siemens 功能描述:DELTA telecommunication TAE 3x6NFN |
| 5TG2484 | 制造商:Siemens 功能描述:DELTA insert antenna through-type/term. |
| 5TG2485 | 制造商:Siemens 功能描述:DELTA insert antenna spur line box |
| 5TG25482 | 制造商:Siemens 功能描述:I-SYSTEM COVER PLATE TV/RF/SAT |
發布緊急采購，3分鐘左右您將得到回復。