
Installation On An MS-DOS Machine (80386 or 80486)
Motorola
Installation Guide
2-1
Chapter 2
Installation Guide
2.1 Introduction
This chapter describes installation on MS-DOS and Sun computers. Two installation
procedures are detailed for the Sun. The first procedure uses the default location for the
files. The second procedure allows the user to select the directory where the compiler’s
files will be located. Only one procedure is needed for MS-DOS machines.
The various parts of the compiler reside in a directory tree named DSP. The default
location for the DSP directory tree is /usr/local on UNIX systems. If this default location
is acceptable, then perform the standard installation; if it is not acceptable, then perform
the alternate installation. The alternate installation procedure allows the user to install the
DSP directory tree anywhere.
2.2 Installation On An MS-DOS Machine (80386 or 80486)
1. Insert the supplied floppy labeled “Disk 1” into floppy drive “A:”.
2. Change to floppy drive “A”, with the command “A:”.
3. Run the install program, Install.exe. This installation program will ask questions
about the computer being used and about where the compiler’s directory tree, DSP,
is to reside.
4. Add all new lines of code specified by Install into the
autoexec.bat
file. The
only difference between the standard and alternate installation procedure on the PC
is whether or not the default output drive or default location is selected. If the
defaults are not selected, an environment variable named DSPLOC must be set in
the
autoexec.bat
file. The Install program will provide directions. The lines to
be added to the
autoexec.bat
file follow:
f. TERMCAP must be set to the current location of <compiler’s dsp directory
tree>\dsp\etc\termcap:
SET TERMCAP=<DSP location>\DSP\ETC\TERMCAP
for example, if the directory <compiler’s dsp directory tree> is d:\usr\mydir, then
the line to be added is
SET TERMCAP=D:\USR\MYDIR\DSP\ETC\TERMCAP
g. TERM must be set to indicate the type of display to be used (probably
nansi-mono
):
SET TERM=NANSI-MONO
F
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
.