2006 DESCO INDUSTRIES INC.
Employee Owned
Electrical Properties:
Property
Test Method
Value
RTG Resistance:
ANSI ESD S7.1
<10E6 Ohms
RTT Resistance:
ANSI ESD S7.1
<10E6 Ohms
Electrical Properties obtained by testing to industrial standards by an
independent testing laboratory @ 10 Volts and 50% relative humidity
unless otherwise specified. Complete text of the test report is available
upon request.
Disclaimer:
All statements, technical data, and recommendations contained herein are
based upon tests we believe to be reliable. However, the accuracy or
completeness thereof is not guaranteed. The proper and correct applications
of products and data is the responsibility of the user. Statements or
recommendations not contained herein shall have no force or effect unless
embodied in a written agreement signed by authorized officers of Desco
Industries, Inc.
Specifications:
Construction: Molded homogeneous conductive rubber
Thickness:
0.50" Nominal (12.7mm)
Section Size: 28" x 36" nominal
Surface:
Light texture embossing
Grounding:
Mats must be properly grounded to
insure proper electrical performance. Ask
for Technical Bulletin TB-2000 for proper
grounding instructions.
Weight:
10 lbs. per section
Hardness:
65 Shore A
Color:
Black
Cleaning:
For optimum electrical performance,
surfaces must be cleaned regularly with a
mild detergent and water solution. We
suggest using Reztore Surface & Mat
Cleaner Item #10435 or Static-Wipes Item
#10600. Do not use cleaners with silicone.
Silicone build-up will create an insulative film
on the surface.
Per section 3 Definitions of Floor standard ESD
STM7.1-2001 "Conductive Flooring Material: A
floor material that has a resistance to ground of
less than 10E6 ohms."