- 您現在的位置：買賣IC網 > PDF目錄359859 > 4002ALMHL-AXXX-4 TRIP AMPLIFIER 230V PDF資料下載
參數資料
| 型號： | 4002ALMHL-AXXX-4 |
| 英文描述： | TRIP AMPLIFIER 230V |
| 中文描述： | 訪問功放230伏 |
| 文件頁數： | 2/2頁 |
| 文件大?。?/td> | 50K |
| 代理商： | 4002ALMHL-AXXX-4 |
4002ALM
10. Input -ve
11. Input +ve
12.
1. Output -ve
2. Output +ve
24. Power input -ve
25. Power input +ve
13. Trans supply -ve
14. Trans supply +ve
T/C -ve
T/C +ve
T/C shield RTD 3rd wire
RTD -ve
RTD +ve
15. Relay 1 N/C
16. Relay 1 N/O
17. Relay 1 common
18. Relay 2 N/C
19. Relay 2 N/O
20. Relay 2 common
Specifications
Dimensions and connections
Description
The 4002ALM trip-amplifier can accept a wide range of inputs
including 4-20mA, thermocouple, R TD and voltage types. The unit
can have up to two relay outputs and each can operate as a high or
low trip. The unit can also produce an isolated high level output.
The relay outputs are single pole change-over relays with mains voltage
rating. Each trip can be configured so that the alarm condition can be
above or below the setpoint. The relays can be energised or de-energised
in the alarm condition, satisfying fail-safe and non-fail-safe applications. In
addition the alarm LEDs can be selected to light when the relay is either
on or off.
The input stage is isolated as standard with the inputs user-reconfigurable
to cover several different ranges if specified at point of order. In addition
there is an optional isolated transmitter supply of 24Vdc, suitable for
exciting most standard transmitters.
The following applications are also possible:
One output relay is energised when the input reaches the high setpoint
and is latched on until the lower setpoint is reached. The reverse operation
is also possible. This is ideal for applications such as pumping out. All the
above options are user-configurable but can be specified at point of order.
Default configuration is set to Hi/Hi alarms with LED on when relay
energised. Please specify at time of ordering if other combinations are
required.
Inputs
The input types and ranges following are our standard ones only. Contact
sales for others.
4002ALM - HL for DC Current and Voltage
0-20mA, 4-20mA, 0-10mA into 15
/30
0-1V, 0-10V, 1-5V, into 100k
/1M
Min and Max full scale ranges:
DC current
0 to 50μA
DC voltage
0 to 100mV
Note: For input voltages greater than 30Vac or 60Vdc a divider unit must
be specified.
0 to 10A
0 to 300V
4002ALM - TC for Thermocouples
Types E, J, K, N, R, S and T non-linearised
Ranges 0-250, 0-500, 0-1200C (Others available)
Auto cold junction compensation. Open cct t/c can drive either
upscale or downscale
4002ALM - R TD for Resistance Thermometers
2 or 3 wire Pt100 or other, linearised output
Ranges 0-250, 0-500, -100-100C (others available)
Outputs
Mains Rated Relays
03A resistive at 240Vac
DC Current and Voltage
0-20mA, 4-20mA, 0-10mA into 750
0-1V, 0-10V, 1-5V into a minimum 2k
Parameter
Supply voltage
Supply current
Input impedance (volt)
Input impedance (mA)
Volt drop (mA input)
Trip point accuracy
Temperature coefficient
Trip point drift
Relay response time
Operating ambient
Relative humidity
Isolation voltage
Surge voltage
Notes
Min
Typ
24Vdc
50mA
1M
15
0.3
Max
Comments
Options:24Vdc or 24Vac, 110Vac, 240Vac
24V supply (max if both relays energised)
Dependent on range (Typ=10V)
Dependent on range (Typ=20mA)
At 20mA input on 0(4) to 20mA range
20mA
100k
0.02
160mA
10M
5k
0.35
±0.25%
±100ppm/C
±100ppm/C
10ms
Signal response 300ms for T/C, 30ms others
0C
0%
1kV
55C
90%
2.5kV for 50μS
Transient of 10kV/μS
Setpoints are adjusted by 20 turn potentiometers on the front panel.
Setpoints can be checked by measuring 0-10V (0-100% voltage on the front panel terminals.
H/H, H/L, L/H, LL, fail-safe, non-fail-safe and LED options are user selectable using internal links.
Hysteresis is set at 1.0%but other values are possible, please specify if required.
The process input level is available as 0-1V (0-100% on front panel or on 3 digit LED display.
Figures based on HL version, 24Vdc supply, 20C ambient.
PRODUCTOR相關PDF資料 |
PDF描述 |
|---|---|
| 4002B | (289.19 k) |
| 4025B | 300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit |
| 4000B | (289.19 k) |
| 400304025081FA | BLECHSCHRAUBE SCHLITZ 2.9X6.5 Inhalt pro Packung: 100 Stk. |
| 224145 | HOLZSCHRAUBE SENK SUPRADRIV 4.2X9.5 Inhalt pro Packung: 100 Stk. |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 4002B | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:(289.19 k) |
| 4002-B | 制造商:WECO Electrical Connectors 功能描述:2 Position 12.5 mm Pitch 26-10 AWG Ceramic Euro Style Terminal Block |
| 4002BDC | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| 4002BDM | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| 4002H | 制造商:JT&T Products 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。