
Series 700 Elevator Strip-Line
Sockets with Bifurcated Contacts
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
ORDERING INFORMATION
FEATURES:
For elevated mounting of LCDs and other odd-centered or high pin count
components.
Any height from .360 to 2.000 [9.14 to 50.80].
Optional spacer available for mounting on .300 [7.62], .600 [15.24], .900
[22.86], 1.100 [27.94], and 1.300 [33.02] centers. Consult factory for other
sizes.
SPECIFICATIONS:
Body is black UL 94-V0 Glass-filled 4/6 Nylon.
Pin is Grade A Phosphor Bronze per QQ-B-750.
Optional spacer is FR-406, .032 [.81] thick.
Pin plating is
11
= 10
μ
[.25
μ
m] min. Gold per MIL-G-45204 over 50
μ
[1.27
μ
m] min.
Nickel per SAE-AMS-QQ-N-290.
10
= 200
μ
” min. Matte Tin per ASTM B545-97 over 50
μ
” min Nickel per
SAE-AMS-QQ-N-290.
10TL
= 200
μ
” min. 90/10 Tin/Lead per MIL-T-10727 Type 1 over 50
μ
” min
Nickel per SAE-AMS-QQ-N-290.
Current rating=1.5 Amp.
Operating temperature= -67°F to 221°F [-55°C to 105°C] Tin &
Tin/Lead plating,
= -67°F to 257°F [-55°C to 125°C] Gold.
Insertion Force=110 grams/pin average; Withdrawal
Force=75 grams/pin average.
Accepts flat leads up to .014 x .020 wide [.36-.51], round leads up to .020
[.51] in diameter.
Socket accepts lead lengths from seating plane
.080-.160 [2.03-4.06].
MOUNTING CONSIDERATIONS:
Suggested PCB hole size=.045 ± .002 [.1.14 ± .05] dia.
“A”=(NO. OF PINS X .100 [2.54]) + .050 [1.27]
“B”=(NO. OF PINS PER ROW - 1) X .100 [2.54]
XX-7XXXX-1XXX
No. of pins
(see table)
Series
Elevated height:
.360-2.000 [9.14-50.80]
Plating:
0 = Tin
0TL = Tin/Lead
1 = Gold
Solder tail pin
ORDERING INFORMATION
(for spacer bar)
0500-X.XXX
Series
Center-to-center
mounting desired
(“C” dimension)
Other sizes
available.
Consult factory.
No. of Pins
20
25
30
34
40
No. of Grooves
2
2
2
3
2
CONTACT DETAIL
SPACER
BAR
A
LL DIMENSIONS
:
INCHES
[
MILLIMETERS
]
All tolerances ± .005 [.13]
unless otherwise specified
12010
REV.E
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
PINS MAY BE
SUPPLIED WITH
CUT ENDS
Frenchtown, NJ USA
TEL:
(908) 996-6841
FAX:
(908) 996-3891
http://www.arieselec.com info@arieselec.com
abc