- 您現在的位置：買賣IC網 > PDF目錄2021 > 19447 (Desco)KIT COMPLETE FLD MTR/ION TEST PDF資料下載
參數資料
| 型號： | 19447 |
| 廠商： | Desco |
| 文件頁數： | 3/3頁 |
| 文件大?。?/td> | 0K |
| 描述： | KIT COMPLETE FLD MTR/ION TEST |
| 標準包裝： | 5 |
| 類型： | 驗證裝置 |
| 使用： | 驗證電離器，測量靜電電壓 |
| 特點： | NIST 溯源 |
| 電源類型： | 9V 電池 |
| 包括： | 電池，盒，隔離板組件，伏特充電器 |
TB-2071 Page 3 of 3
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Fax (909) 627-7449
DESCO EAST - 90 Hudson Road, Canton, MA 02021-1407 (781) 821-8370 Fax (781) 575-0172 Web Site: http://www.desco.com
IMPORTANT: A ground path must be provided between one of the
output terminals of the charging unit and the ground reference of
the Fieldmeter and Adapter Plate. This is normally provided by
holding the Charger in one hand and the Fieldmeter with Adapter
Plate in the other. If this is not possible, you must use a test lead
to connect one to the charger output terminals and the fieldmeter
ground connection.
Figure 6. Taking decay measurements.
Calibration
The overall accuracy of the 19447 Test Kit and the 19445 digital
fieldmeter is +/- 5% nominal. Calibration of the meter and the
Ionization Test Kit should only be performed by the factory. Both
the 19447 and the 19445 are calibrated to NIST traceable
standards. Contact our Customer Service Department for details.
Maintenance
BATTERY CARE
The battery in the Model 19447 and 19445 should be replaced
annually and whenever you plan an extended period of unattended
monitoring. See specifications for battery replacement type.
CLEANING
It is important to keep the insulators on the adapter plate clean
and free of contaminates that may cause surface leakage. To test
the performance of the adapter plate, charge the plate and note
the discharge rate in a non-ionized area. The self discharge rate to
10% of original voltage should not be less than five minutes.
The area around the aperture of the Model 19445 must be kept
clean to ensure accurate, drift-free readings. Never touch the
aperture with anything. To remove dust or other particulate matter,
use low-pressure instrument-grade air. To remove more severe
contamination, spray or flush with the smallest practical amount of
clean technical-grade of isopropyl alcohol. Then allow the
instrument to air dry for several hours.
Specifications
Isolated Plate Assembly
Plate Capacitance:
13 picofards ± 2 picofards
Range:
0 to ± 2kV, higher voltages may
be measured
Grounding:
Connection through conductive
case of Model 19445 Field meter
Weight:
1.5 oz.
Charging Unit
Output:
1100VDC monimal, <1:A Max.
Output Terminals:
Two acorn buttons labeled for
"+" and "-"
Load Regulation:
Better than 8% NL to FL where
FL = 109 ohms
Battery Type:
9 volt alkaline
Battery Life:
40 hours
Temperature Range:
+10° to +30°C (+50° to +86°F)
Relative Humidity:
10% to 80% non-condensing
Dimensions:
3.75"L x 2.88"W x 1"D
(9.53 x 7.32 x 2.54cm)
Weight:
2.8 oz. (79 gm)
Limited Warranty
Desco expressly warrants that for a period of one (1) year from the date
of purchase, Desco Ionization Test Kits will be free of defects in material
(parts) and workmanship (labor). Within the warranty period, the product
will be tested, repaired, or replaced at Desco’s option, free of charge.
Call our Customer Service Department at 909-627-8178 (Chino, CA) or
781- 821-8370 (Canton, MA) for a Return Material Authorization (RMA)
and proper shipping instructions and address. Include a copy of your
original packing slip, invoice, or other proof of purchase factory.
Warranty repairs will take approximately two weeks.
If your unit is out of warranty call Customer Service at 909-627-8178
(Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material
Authorization (RMA) and proper shipping instructions and address.
Desco will quote repair charges necessary to bring your unit up to
factory standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL
OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. The express
warranty will not apply to defects or damage due to accidents, neglect,
misuse, alterations, operator error, or failure to properly maintain, clean
or repair products.
Limit of Liability
In no event will Desco or any seller be responsible or liable for any
injury, loss or damage, direct or consequential, arising out of the use of
or the inability to use the product. Before using, users shall determine
the suitability of the product for their intended use, and users assume all
risk and liability whatsoever in connection therewith.
2005 DESCO INDUSTRIES INC.
Employee Owned
相關PDF資料 |
PDF描述 |
|---|---|
| 19493 | IONIZATION TEST KIT |
| 19520 | IONIZER BLOWER BENCH 220V NIST |
| 19588 | CONTR HAND GUN W/HOSE 220V NIST |
| 19635 | TESTER MINIMEG 9VDC NIST |
| 19665 | MONITOR DUAL WIRE CONTINOUS 120V |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 19447 CAL | 制造商:Desco Industries Inc 功能描述:CALIBRATED DESCO P/N 19447, TEST KIT, SKU # 61H6002 |
| 194470 | 制造商:DANAHER - INDUSTRIAL/SPECIALTY 功能描述:Electro-Optic Liquid Level Switch, 1/2" NPT, 212oF, 5 VDC, Dry Sink |
| 1944700000 | 制造商:Weidmuller 功能描述:CONN PLUG FEMALE 12POS PCB 制造商:Weidmuller 功能描述:PCB TERMINALS & CONNECTORS / B2L 3.50/12/180FQV6 SN BK BX |
| 194471 | 制造商:Gems Sensors & Controls 功能描述:LIQUID LEVEL SENSOR; Output Current:18mA; Sensor Output:Sink; Supply Voltage DC Min:5V; Supply Voltage DC Max:12V; Body Material:Steel; Connection Size:1/2"; Housing Material:Steel; Leaded Process Compatible:No; Mounting Type:Conduit;RoHS Compliant: No |
| 1944710000 | 制造商:Weidmuller 功能描述:CONN PLUG FEMALE 14POS PCB |
發布緊急采購，3分鐘左右您將得到回復。