- 您現在的位置：買賣IC網 > PDF目錄2021 > 19276 (Desco)TESTER X3 COMBO PROG W/DL PLATE PDF資料下載
參數資料
| 型號： | 19276 |
| 廠商： | Desco |
| 文件頁數： | 3/6頁 |
| 文件大小： | 0K |
| 描述： | TESTER X3 COMBO PROG W/DL PLATE |
| 標準包裝： | 1 |
| 類型： | 測試儀，鞋和腕帶測試 |
| 使用： | 驗證鞋具和腕帶接地 |
| 特點： | NIST 可追溯，分別用于鞋具和腕帶的測試電路 |
| 電源類型： | AC 適配器 |
| 包括： | AC 適配器，證書，軟線 |
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Website: Desco.com
TB-3034 Page 3 of 6
2013 DESCO INDUSTRIES, INC.
Employee Owned
NOTE: At 1 Gigohm high limit resistance, a dirty foot
plate could result in a false pass. Be sure to keep the
foot plate clean particularly when using this setting.
This setting is not suitable for relative humidity greater
than 50%.
Wrist Strap Resistance
DIP switches 5 and 6 control the HIGH test limit.
DIP switch 5 must be ON (default setting) for the wrist
strap test to be active. The wrist strap test will be
disabled if DIP switch 5 is set to OFF.
The LOW limit for the wrist strap test is set to 750
kilohms and cannot be modified by the user.
INSTALLING THE 19276 COMBO TESTER X3
1. Mount the tester at the desired location using the
four mounting holes located in the corners of the
yellow mounting plate.
2. Set the Dual Foot Plate below the tester.
3. Insert one end of the foot plate cord into the stereo
jack located at the bottom of the tester. Insert the
opposite end of the cord into the stereo jack located
at the back of the foot plate.
4. Use the guide located on the bottom of the foot
plate to route the cord out of the side. This will
prevent the foot plate cord from being accidentally
tripped and unplugged.
5. Insert the ground cord’s banana plug into the ground
jack located at the bottom of the tester. Connect
ground cord’s ring terminal to equipment ground.
This connection will remove any static charge from
the user before the test. NOTE: Failure to correctly
ground the Combo Tester X3 may result in damage not
covered under warranty.
6. Power the Combo Tester X3 using the included
power supply.
INSTALLING THE 19277 COMBO TESTER X3 WITH
STAND
1. Insert the pedestal to the baseplate with the
mounting bracket sloping toward the operator. Be
sure to align the screw holes located at the base of
the pedestal.
2. Use the two 1/4-20 socket cap screws to secure the
pedestal to the baseplate.
Figure 3. Routing the foot plate cord through the foot
plate’s guide
Figure 4. Securing the pedestal to the baseplate using
the 2 socket cap screws
3. Route the ground and foot plate cords through the
pedestal. Feed the cords from the bottom and have them
exit through the top.
Figure 5. Routing the ground and foot plate cords
throught the pedestal
Switch 5 Switch 6 HIGH Limit Resistance
OFF
wrist strap test disabled
ON
10 Megohms (1 x 107)
ON
OFF
35 Megohms (3.5 x 107)
default setting
相關PDF資料 |
PDF描述 |
|---|---|
| 19350 | TESTER W/S 2 STATE TOUCH NIST |
| 19430 | STATIC LOCATOR DIGITAL |
| 19447 | KIT COMPLETE FLD MTR/ION TEST |
| 19493 | IONIZATION TEST KIT |
| 19520 | IONIZER BLOWER BENCH 220V NIST |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 19276-0001 | 功能描述:端子 .250X032 FEM FIQD CT INSULK 22-18 QUIXON RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
| 19276-0002 | 功能描述:端子 .250X.032 FEM FIQD INSULK 22-18 QUIXON RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
| 19276-0003 | 功能描述:端子 .250X032 FEM FIQD TP INSULK 22-18 QUIXON RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
| 19276-0004 | 功能描述:端子 .250X032 FEM FIQD CT INSULK 16-14 QUIXON RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
| 19276-0005 | 功能描述:端子 .250X.032 FEM FIQD INSULK 16-14 QUIXON RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
發布緊急采購，3分鐘左右您將得到回復。