DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
DATE:
2/06
MATERIAL STATFREE F
DRAWING PM-74
STATFREE F FLOOR MAT, VINYL, HOMOGENEOUS, DISSIPATIVE, .125 (3.2MM)
Brown
Electrical Properties:
Property
Test Method
Value
RTG Resistance:
ESD-S7.1
108 Ohms
RTT Resistance:
ESD-S7.1
108 Ohms
Charge Decay:
FTMS 101C, M4046
0.18 - 0.34 sec.
Electrical Properties obtained by testing to industrial standards by an
independent testing laboratory @ 100 Volts and 50% relative
humidity unless otherwise specified. Complete text of the test report
is available upon request.
Disclaimer:
All statements, technical data, and recommendations contained
herein are based upon tests we believe to be reliable. However, the
accuracy or completeness thereof is not guaranteed. The proper
and correct applications of products and data is the responsibility of
the user. Statements or recommendations not contained herein shall
have no force or effect unless embodied in a written agreement
signed by authorized officers of Desco Industries, Inc.
Specifications:
Construction:
Homogeneous solid vinyl
Thickness:
0.125" (3.2 mm)
Color:*
Brown
Texture:*
Corrugated face with smooth back.
Weight:
0.67 lbs/ft2 (0.361 g/cm2 ) nominal
Hardness:
80 Shore A (ASTM D-2240)
Tensile Strength:
Greater than 1000 PSI, ASTM D-412
Elongation:
200%
Abrasion Resistance: 28.7 grams loss ASTM-D3389 Method B,
1000 grams 4000 cycles
*Color and texture may vary between lots and mills
Grounding: This material must be properly grounded for optimum
electrial performance. Ask for Technical Bulletin TB-2000 for mat
grounding instructions.
Cleaning: For optimum electrical performance, surface must be
cleaned regularly using an ESD mat cleaner. We suggest using
our Reztore Surface & Mat Cleaner Item #10435 or Static Wipes
Item #10600. Do not use cleaners with silicone. Silicone buildup
will create an insulative film on the surface.
Description:
Statfree F corrugated material is
specifically designed for use as floor
mats or floor runners. The corrugated
surface provides cushioning and
excellent traction. It can be cut to
configure custom sizes. Statfree F
meets ANSI/ESD S20.20 and EIA-
625 ESD worksurface and flooring
requirements. It also meets the
requirements of DOD-HDBK-263,
DTD-STD-1686A, DOD-STD-2000,
ESD S4.1 and EN 100 015 Issue 1.
See reverse side for available mat and roll sizes.
Matting materials have a tendency to shrink slightly when first unrolled. In
applications where length is critical, allow the material to relax for at least 4
hours before cutting to size. Always trim with a sharp knife or razor blade.
2006 DESCO INDUSTRIES INC.
Employee Owned
Made in America
Limited Lifetime Warranty
Desco warrants for one year that Statfree matting products will be free of defects
in materials and workmanship and will guarantee dissipative/ conductive mat
properties for the life of the mat. Damage to matting caused by misuse of any kind,
including using inappropriate cleaners is not covered by Desco Limited Warranty.
Tolerances:
Width ± .250"
Length ± .250" every 1 linear
foot of running material.
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing this
product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1.
See Desco Industries Inc. letter on-line
at Desco.com.