DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.comPHONE (909) 627-8178
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
DRAWING
NUMBER
12780
DATE:
December
2012
STATSHIELD BAG, SHIELDING, METAL-IN CONSTRUCTION, GREEN
2012 DESCO INDUSTRIES INC.
Employee Owned
Side Weld Seals 3/8 in. (±0.10)
Proprietary film - available only from Desco Industries Inc.
Low Charging Static
Dissipative Proprietary
Outer Polyester Layer
Aluminum Shielding Layer
Low Charging Static
Dissipative Proprietary Inner
Polyethylene Layer
The bag’s material meets the performance specification requirements of
ANSI/ESD S541.
Bag is free of amines, N-octanoic acid, and heavy metals.
Statshield, Statfree, and Faraday are Registered Trademarks of Desco Industries Inc.
Mixed Unsortable Plastic Scrap
Mixed unsortable plastic scrap shall contain assorted
plastics of multiple grades that are co-extruded,
bonded or laminated together which are unsortable into
individual grades.
Desco’s bags are recyclable
7
STATSHIELD METAL-IN SERIES
LEAD-FREE AREA ESD SHIELDING BAG
Specifications:
Electrical Properties
Typical Values
Test Procedures/Method
Surface Resistance:
Outer Surface
<10E11 ohms
ANSI/ESD S11.11
Aluminum Layer
<10E2 ohms
ANSI/ESD S11.11
Inner Surface
<10E11 ohms
ANSI/ESD S11.11
Static Shielding
<25 nJ
ANSI/ESD S11.31
Charge Generation
Teflon: 0.09 nC/sq. in.
Modified Incline Plane
Quartz: 0.01 nC/sq. in.
Modified Incline Plane
Capacitance Probe (to dissipate 1 KV) <30V
ANSI/EIA 541/Appendix E, 1kV Discharge
Physical Properties
Bag Thickness:
Thickness
Nominal .0030” (.0762mm) ±10%
ASTM D-2103
Width (Inside Dimensions)
Nominal -0” / + .125”
Length (Inside Dimensions)
Nominal ± .125”
Light Transmission (%)
>40% (Tobias)
ASTM D-1003
Heat Seal (lbs/in)
>10
375°F, 1/2 sec 60 psi
Seam Strength
Pass
ANSI/ESD S541
Tear Strength (lbs)
>25
ASTM D-1004
Puncture Resistance (lbs)
>10
ASTM D-2065
MVTR (gms / 100 in2 / 24 hrs, 100°F)
<0.40
FTMS 101C/2065
OTR (cc / 100 in2 / 24 hrs)
<6.1
ASTM D-1434
Abrasion Resistance
>100 cycles
Sutherland Abr. (.0000 Steel Wool)
Outgassing
Pass
ASTM E595
Non-corrosive
Pass
MIL-STD-3010, M3005
Chemical Properties
Corrosion
No effect on aluminum, copper, silver, Sn-Pb coated foil,
stainless steel, low carbon steel
Polycarbonate Capability,
Yes
No Amines or N-Octanoic Acid
Not present
ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall
require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
Made in the
United States of America
RoHS Compliance Statement
None of the following materials are intentionally added in manufacturing this
product: lead, mercury, cadmium, hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1. See Desco Industries Inc. letter on-line