
2
Axial Luminous Intensity and Viewing Angle @ 25
°C
Part
Iv (mcd) @ 20 mA
Number
2
θ1/2[1]
Package
HLMP-
Package Description
Min.
Typ.
Degrees
Outline
D101
T-13/4 Red Tinted Diffused
35
70
65
A
D105
T-13/4 Red Untinted, Non-diffused
90
240
24
B
K101
T-1 Red Tinted Diffused
22
45
60
C
K105
T-1 Red Untinted Non-diffused
35
65
45
C
Note:
1.
θ
1/2 is the off axis angle from lamp centerline where the luminous intensity is
1/2 the on-axis value.
Absolute Maximum Ratings at TA = 25°C
Peak Forward Current[1,2] .................................................................................................................... 300 mA
Average Forward Current[2] ................................................................................................................... 20 mA
DC Current[3] ......................................................................................................................................... 30 mA
Power Dissipation ................................................................................................................................. 87 mW
Reverse Voltage (IR = 100 A) .................................................................................................................... 5 V
Transient Forward Current (10
s Pulse)[4] ......................................................................................... 500 mA
LED Junction Temperature ..................................................................................................................... 110
°C
Operating Temperature Range ................................................................................................... -20 to +100
°C
Storage Temperature Range ....................................................................................................... -55 to +100
°C
Lead Soldering Temperature [1.6 mm (0.063 in.) from body] ........................................... 260
°C for 5 seconds
Notes:
1. Maximum IPEAK at f = 1 kHz, DF = 6.7%.
2. Refer to Figure 6 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 5.
4. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and
wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.