
1
Applicable for waterproof usage. Its
waterproof grade is more than 7 ingress
protection of JIS C 0920
(IEC 60529 IPX7).
Waterproof performance
Contained seal ring
Solid rubber seal
Double-spring construction
Housing-to-terminal locks
Inner housing lock
Interchangeability
Header for use specifically with resin coated
("potted") PC board
JWPF CONNECTOR
2.0mm pitch/Disconnectable Crimp style connectors
Specifications ––––––––––––––––––
Current rating:
3A AC, DC (AWG #22)
Voltage rating:
100V AC, DC
Temperature range: -40C to +85C
(including temperature rise in applying
electrical current)
Contact resistance: Initial value/5m
max.
After environmental testing/10m
max.
Insulation resistance:
800M
min.
Withstanding voltage:
1,000V AC/minute
Applicable wire: AWG #26 to #22
0.13 to 0.33mm2
Insulation O.D./1.4 to 1.6mm
Waterproof grade:
More than grade 7 ingress protection of
JIS C 0920 (IEC 60529 IPX7).
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards –––––––––––––––––––––
0 Recognized E60389
Note: 1. Tolerances are non-cumulative:
±0.05mm for all centers.
2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
SWPR-001T-P025
Model No.
Applicable wire
Q'ty / reel
Insulation O.D
(mm)
Material and Finish
Copper alloy, tin-plated (reflow treatment)
SWPR-001T-P025
RoHS compliance
Contact
PC board layout (viewed from component side) and Assembly layout
4