參數資料
型號: μPD780824
廠商: NEC Corp.
英文描述: 8 Bit Microcontrollers(8 位微控制器)
中文描述: 8位微控制器(8位微控制器)
文件頁數: 2/4頁
文件大小: 35K
代理商: ΜPD780824
The heart of the 78K0 family is a powerful 8-bit CPU. The 0.35 mm process technology ensures
an excellent power/performance ratio. Four 8-bit register banks can be concatenated to a 16-bit
register to support 16-bit operation, eg, 8-bit multiplication with a 16-bit result or 16-bit index
addressing. The 64-Kbyte linear address space is accessed via 16-bit addresses. Bit
manipulation operations are supported on all registers and the entire RAM address space.
Subclock CPU operation to reduce system power consumption is also supported.
With its minimized circuit design, NEC’s DCAN module is an ideal solution for providing full
hardware support for most stand-alone CAN communication applications. Transmission is
supported by two independent transmit buffers with easy priority control. With up to 16
mailboxes in the communication RAM, the receive path provides virtually “Full CAN”
performance. The expansion RAM is used as CAN data RAM to the CPU. The number of
mailboxes for transmission and CAN can be configured by setting the DCAN’s SFR registers.
Each message buffer allocates 16 bytes of expansion RAM, resulting in a RAM requirement of
maximum 288 bytes for the DCAN module.
The converter has 5 channels with 8-bit resolution. One of the channels can be used as a failure
detector that generates an internal interrupt on recognizing an analog input above/below a
certain voltage. The 8-bit conversion time per channel is typically below 18 μs at 8 MHz. The A/D
resistor chain can be switched off to reduce power consumption.
The serial interface includes one UART (Universal Asynchronous Receiver Transmitter) that
supports transfer rates up to 125 kbps. A dedicated baud rate generator sets the transfer rate.
A 3-wire CSI (Clocked Serial Interface) for transfer rates up to 1 Mbps (at 8 MHz) is also provided.
A flexible timer offers a total of 6 timer channels. One-channel 16-bit timers can be used for
precise pulse measurements with up to three 16-bit capture registers. Two/three-channel 8-bit
timers can be used as interval timers, for PWM output and as external event counters. The
watch timer generates a watch time and can be used simultaneously as an interval timer. The on-
chip watchdog timer monitors the CPU and generates either an internal reset or a non-maskable
interrupt. It can also be used as an additional interval timer if the watchdog function is not
required.
The LCD controller/driver can drive up to 112 LCD segments (28 segments, 4 commons). All
LCD segments are shared with ports and can be selected bitwise to ensure maximum port pin
availability if the application does not require all LCD segments.
The sound generator produces sounds composed of a frequency output and a PWM signal for
volume control. The generated frequency is in the range of 256 Hz to 7.7 kHz. It can be used for
simple alarm sounds, like buzzer gong and beeper.
The on-chip universal instrument motor drivers are able to drive 4 cross coil/stepper motors with
up to 30 mA drive capability per coil. Alternatively, the outputs can be used as simple 8-channel,
9-bit PWM outputs or as high drive output ports.
Functional Block Description
CPU
DCAN Module
Serial Interface
Timer
LCD Driver
A/D Converter
Sound Generator
Instrument Drivers
相關PDF資料
PDF描述
μPD78083 8 Bit Single Chip Microcontrollers
μPD780018 8 Bit Single Chip Microcontrollers(8位單片微控制器)
μPD780018Y 8 Bit Single Chip Microcontrollers(8位單片微控制器)
μPD780034(A) 8 Bit Single Chip Microcontrollers
μPD780308 8 Bit Single Chip Microcontrollers(8位單片微控制器)
相關代理商/技術參數
參數描述
PD784054GCA2 制造商:NEC 制造商全稱:NEC 功能描述:16-BIT SINGLE-CHIP MICROCONTROLLER
PD784976A 制造商:NEC 制造商全稱:NEC 功能描述:16-Bit Single-Chip Microcontroller
PD7869 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic
PD78F0134 制造商:NEC 制造商全稱:NEC 功能描述:8-Bit Single-Chip Microcontrollers
PD78F0134(A) 制造商:NEC 制造商全稱:NEC 功能描述:8-Bit Single-Chip Microcontrollers