
STV223XD/224XC - STV2238D MAIN FEATURES
2 STV2238D MAIN FEATURES
16/76
I
I2C Bus control (Read and Write modes).
I
PLL PIF demodulator, bus-controlled VCO
alignment.
I
Positive and negative IF modulation.
I
Digital AFC.
I
Tuner-delayed AGC output.
I
White and Black Spot cancellation.
I
SIF with QSS structure.
I
Intercarrier capability.
I
Built-in sound bandpass.
I
Multistandard PLL FM Demodulator (4.5, 5.5,
6.0, 6.5 MHz).
I
AM demodulator for France.
I
Sound subcarrier output for Stereo chassis: FM
and NICAM carriers.
I
Audio switch for external audio input, Mono
chassis.
I
Digital volume control.
I
Audio Mute.
I
Automatic Volume Levelling (AVL) on audio
signal (internal or external audio).
I
Digital buffer for SAW filter switching.
I
Video
switch,
three
Broadcasting Signal (CVBS) inputs and two
CVBS outputs (which can be used to drive a
teletext decoder).
I
SVHS switch, Y input is combined with CVBS3
input.
I
Capability to output Y+C signal on second
CVBS output.
I
OSD RGB
analog
detection on fast blanking OSD pin, contrast
control capability.
I
Half-contrast control pin.
I
External analog RGB inputs with contrast and
saturation control (external RGB matrixed in
YUV). External analog YCrCb inputs can be
connected to the same inputs. In this case, the
sync signal must be sent to the CVBS input, and
External YCrCb mode must be selected through
the I2C bus.
I
Y,U,V inputs outputs: Y,U,V inputs/outputs for
the use of enhanced picture ICs.
I
Integrated chroma filters (trap, bandpass,
cloche) with automatic alignment.
I
Integrated luminance delay line.
I
Adjustable peaking on the luminance signal with
coring function.
Composite
Video
inputs,
fast
blanking
I
Black Stretch circuit.
I
Automatic RGB peak regulation (APR).
I
PAL/SECAM/NTSC
automatic identification of standards.
I
Integrated chroma delay line.
I
Full integrated SECAM decoder.
I
Hue control, two selectable matrices in NTSC
mode.
I
Automatic Flesh Control circuit with two
selectable characteristics (normal and wide).
I
ACC overload circuit.
I
Chroma subcarrier output which could be used
to drive a comb filter circuit.
I
Automatic digital cut-off current loop with warm-
up detection circuit.
I
White
point
(drive)
adjustments.
I
Manual cut-off capability.
I
Beam current limiter control stage.
I
High performance synchronization pulses
separator.
I
Horizontal synchronization with two phase-
locked loops.
I
Integrated VCO, auto-calibration using the
chroma crystal reference frequency.
I
Automatic time constant selection for the first
PLL, three selectable time constants.
I
Video identification circuit (independent from
PLL1).
I
Noise detector circuit.
I
Vertical countdown circuit.
I
Automatic 50/60 Hz selection circuit.
I
Blanking and inserted cut-off pulses position
adapted to standard (50 or 60 Hz).
I
Long blanking mode capability in 60 Hz (same
blanking as with 50 Hz standard).
I
Possibility of inserting cut-off pulses after a
vertical oversize blanking signal.
I
De-interlace capability.
I
Horizontal
starting
capability.
I
Horizontal and vertical position adjustments,
vertical amplitude control voltage (combined
with chroma subcarrier output).
I
4/3, 16/9 selection voltage.
I
Oversize Blanking capability on OSD Fast
Blanking input.
color
decoder
with
and
cut-off
point
circuit
with
soft-start