
Installation Instructions for the
ISSUE 6
40PC Series Miniature Signal Conditioned
Pressure Sensors
PK 88820
Sensing and Control
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or
emergency stop devices, or in any other
application where failure of the product could result
in personal injury.
Failure to comply with these instructions could
result in death or serious injury.
GENERAL INFORMATION
40PC Series miniature pressure sensors are fully
compensated and amplified. The 0.5 to 4.5 V analog
output voltage signal is linearly proportional to input
pressure.
The miniature package mounts easily on printed
circuit boards. The 6-pin DIP package has pin 1
clearly indicated by the square corner. Pins 4, 5, and
6 are internal connections. Do not connect to
external circuitry.
SOLDERING/ASSEMBLY
Limit soldering to 315°C (600°F) maximum, with
duration of 10 seconds maximum. Leads must be
adequately supported during any forming/shearing
operation to ensure that the leads are not stressed
inside the plastic case.
Clean appropriately in accordance with applicable
safety procedures
ELECTRICAL CONNECTION
L
GND
(2)
R
(3)
OUT
IN
+Vs
(1)
NOTES:
1. Square corner marks
pin 1 (Vs).
2. Output can be shorted
to ground. Do not short
to the positive supply
voltage.
ELECTRICAL SPECIFICATIONS
@ 25°C, 5 VDC (unless otherwise noted)
Pressure Range
0 to 15 psi
0 to 100 psi
0 to 150 psi
0 to 250 psi
0 to 500 psi
Full Scale
4.50 VDC Typ.
Null
0 to 15 psi
.50
± .110 VDC
0 to 100 psi
.50
± .040 VDC
0 to 150 psi
.50
± .040 VDC
0 to 250 psi
.50
± .040 VDC
0 to 500 psi
.50
± .040 VDC
Span
0 to 15 psi
4.00
± .110 VDC
0 to 100 psi
4.00
± .090 VDC
0 to 150 psi
4.00
± .070 VDC
0 to 250 psi
4.00
± .070 VDC
0 to 500 psi
4.00
± .090 VDC
Supply Voltage
5 VDC
Supply Current
10 mA max.
Output Source Current
0.5 mA max.
Output Sink Current
1.0 mA max.
Short Circuit Limit
See Note 2
Operating
Temperature
-45 to +125
°C
(-49 to +257
°F)
Storage Temperature
-55 to +125
°C
(-67 to +257
°F)
Hysteresis &
Repeatability
0.15% Span, Typ.
Media Compatibility
P1 Port: Dry Gases Only. Media
must be compatible with epoxy
based adhesive
P2 Port: Media must be
com patible with glass, silicon,
stainless steel, invar, Sn/Ni
plating and An/Ag solder
CAUTION
ELECTROSTATIC
SENSITIVE
DEVICES
ESD SENSITIVITY:
CLASS I
DO NOT OPEN OR HANDLE
EXCEPT AT A
STATIC FREE WORKSTATION