
Page 18 of 59
Rev. 1.0 March 2009
DDP 4Gb DDR3 SDRAM
K4B4G0446B
K4B4G0846B
9.0 AC and DC Output Measurement Levels
9.1 Single Ended AC and DC Output Levels
[ Table 14 ] Single Ended AC and DC output levels
Note : 1. The swing of +/-0.1 x VDDQ is based on approximately 50% of the static single ended output high or low swing with a driver impedance of 40
and an effective test load of 25
to VTT=VDDQ/2.
9.2 Differential AC and DC Output Levels
[ Table 15 ] Differential AC and DC output levels
Note : 1. The swing of +/-0.2xVDDQ is based on approximately 50% of the static singel ended output high or low swing with a driver impedance of 40
and an effective test load of 25
to VTT=VDDQ/2 at each of the differential outputs.
9.3 Single Ended Output Slew Rate
With the reference load for timing measurements, output slew rate for falling and rising edges is defined and measured between VOL(AC) and VOH(AC)
for single ended signals as shown in Table 16 and figure 6.
[ Table 16 ] Single Ended Output slew rate definition
Note : Output slew rate is verified by design and characterization, and may not be subject to production test.
[ Table 17 ] Single Ended Output slew rate
Description : SR : Slew Rate
Q : Query Output (like in DQ, which stands for Data-in, Query-Output
se : Singe-ended Signals
For Ron = RZQ/7 setting
Symbol
Parameter
DDR3-800/1066/1333/1600
Units
Notes
VOH(DC) DC output high measurement level (for IV curve linearity)
0.8 x VDDQ
V
VOM(DC) DC output mid measurement level (for IV curve linearity)
0.5 x VDDQ
V
VOL(DC) DC output low measurement level (for IV curve linearity)
0.2 x VDDQ
V
VOH(AC) AC output high measurement level (for output SR)
VTT + 0.1 x VDDQ
V1
VOL(AC) AC output low measurement level (for output SR)
VTT - 0.1 x VDDQ
V1
Symbol
Parameter
DDR3-800/1066/1333/1600
Units
Notes
VOHdiff(AC)
AC differential output high measurement level (for output SR)
+0.2 x VDDQ
V1
VOLdiff(DC)
AC differential output low measurement level (for output SR)
-0.2 x VDDQ
V1
Description
Measured
Defined by
From
To
Single ended output slew rate for rising edge
VOL(AC)
VOH(AC)
VOH(AC)-VOL(AC)
Delta TRse
Single ended output slew rate for falling edge
VOH(AC)
VOL(AC)
VOH(AC)-VOL(AC)
Delta TFse
Parameter
Symbol
DDR3-800
DDR3-1066
DDR3-1333
DDR3-1600
Units
Min
Max
Min
Max
Min
Max
Min
Max
Single ended output slew rate
SRQse
2.5
5
2.5
5
2.5
5
TBD
5
V/ns
VOH(AC)
VOL(AC)
delta
TRse
delta
TFse
Figure 6. Single Ended Output Slew Rate definition
VTT