- 您現在的位置：買賣IC網 > PDF目錄166385 > AZ4002 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, 5mm, PANEL MOUNT PDF資料下載
參數資料
| 型號： | AZ4002 |
| 元件分類： | 開關 |
| 英文描述： | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, 5mm, PANEL MOUNT |
| 封裝： | ROHS COMPLIANT |
| 文件頁數： | 18/21頁 |
| 文件大小： | 709K |
| 代理商： | AZ4002 |
42
MOUNTING METHOD
1. L socket type
1) After loosening the L socket fastening
screws, grasp the terminal cover and pull
it away from the switch body.
2) Remove the fastening screw from the
terminal block. (Remove with the 3 termi-
nal receptacle.)
3) Loosen the hexagonal nut and
remove the rubber bushing and washer
from the inside.
4) Select cord from applicable wire table.
5) Decide which direction the cord outlet
is to face and strip the sheath according-
ly. (See page 43.)
6) After passing the applicable cord
through the hexagonal nut, bushing, and
washer in that order, pass the cord
through the terminal case.
7) After stripping the cord sheath, insert
the corresponding wires into the grooves
of the terminal body up to the wire stop,
then crimp the terminal receptacle over
the wires with a pair of pliers.
8) After the terminals have been properly
crimped in the terminal body, insert the
body into the terminal case. (When
inserting the body, be careful not to block
the hole for the fastening screw with the
wires.)
9) Temporarily screw in the fastening
screw through the terminal body, then
insert the washer and rubber bushing
into the cord opening of L socket.
Tighten it with a wrench or pliers.
10) Apply the rubber packing over the
terminals, then insert the L socket into
the switch body.
11) Tighten the fastening screw into the
switch body.
2. Socket with cord (including socket
with lamp)
1) Apply the rubber packing over the ter-
minals, then insert the socket with cord
into the switch body.
2) Screw the socket fastening screw into
the switch body and tighten it.
Mounting
The QL micro limit switch is manufac-
tured with a very small variation in the
distance between the datum plane and
the operating point. When the operating
point has been accurately established
and the mounting position clearly deter-
mined, two M4 bolts should be used
securely fastening the switch.
Pull away from the body.
Turn counterclockwise.
Terminal receptacle
Terminal body connection diagram
Turn counterclockwise.
Clockwise direction
Operating position
M4 fastening bolts
Mounting
Mounting plate
datum plane
(O.P.)
Lead wire stop
Terminal body
Terminal receptacle
Lead wire
QL (AZ4)
相關PDF資料 |
PDF描述 |
|---|---|
| AZ4003 | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, 5mm, PANEL MOUNT |
| AZ4008F | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, PANEL MOUNT |
| AZ46079 | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, PANEL MOUNT |
| AZ4703F | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, 5mm, PANEL MOUNT |
| AZ510642 | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, PANEL MOUNT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AZ40029 | 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Switch, Limit, QL Series 制造商:Panasonic Electric Works 功能描述:LIMIT SWITCH, ROLLER PLUNGER, SPDT; Actuator Style:Roller Plunger; Operating Force Max:6.86N; Switch Operation:-; Contact Voltage AC Max:250V; Contact Voltage DC Max:125V; Contact Current AC Max:5A; Contact Current DC Max:5A |
| AZ40039 | 制造商:Panasonic Electric Works 功能描述: |
| AZ40049 | 制造商:Panasonic Electric Works 功能描述:SUBMINIATURE SIZE LIMIT SWITCHES |
| AZ40060001 | 功能描述:40MHz ±10ppm 晶體 7pF -40°C ~ 105°C 表面貼裝 4-SMD 制造商:txc corporation 系列:AZ 包裝:* 零件狀態:有效 類型:MHz 晶體 頻率:40MHz 頻率穩定度:±18ppm 頻率容差:±10ppm 負載電容:7pF ESR（等效串聯電阻）:- 工作模式:- 工作溫度:-40°C ~ 105°C 等級:- 安裝類型:表面貼裝 封裝/外殼:4-SMD 大小/尺寸:0.098" 長 x 0.079" 寬（2.50mm x 2.00mm） 高度:0.022"（0.55mm） 標準包裝:3,000 |
| AZ40079 | 功能描述:SWITCH SNAP ACTION SPDT 5A 125V 制造商:panasonic industrial automation sales 系列:AZ4 包裝:散裝 零件狀態:有效 電路:SPDT 開關功能:開-瞬時 額定電流:5A（AC/DC） 額定電壓 - AC:125V 額定電壓 - DC:30V 致動器類型:側旋，可調桿 安裝類型:底座安裝 端子類型:焊接，快速連接 - 0.110"（2.8mm） 侵入防護:IP64 - 防塵，耐水 特性:- 操作力，扭矩:113 ~ 450gf 釋放力:6 ~ 25gf 預行程:15° 差動行程:3° 超行程:- 工作位置:- 機械壽命:10，000，000 次循環 電氣壽命:300，000 次循環 工作溫度:-20°C ~ 60°C 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。